CrawlJobs Logo

Assembly Operator- Electrical Production Technician

United States, West Branch · Job Posted April 11, 2026
Apply Position
Job Link Share

Job Description

The role of Electrical Production Technician directly supports the company’s mission to develop and deliver clean power plants that make 100% renewable energy a reality for the world. As an Assembly Operator - Electrical Production Technician, you will be responsible for installing and wiring electrical systems within wind turbines, including control panels, sensors, and harnesses (according to established quality, safety and environmental procedures). This role is ideal for individuals with electrical assembly experience who are excited to contribute to the clean energy transition.

Job Responsibility

  • Assemble and install electrical components in wind turbine nacelles and hubs
  • Route and secure wiring harnesses, connectors, and control systems
  • Use testing equipment to verify electrical continuity and system functionality
  • Follow safety protocols and maintain a clean, organized work area to prevent work related injuries
  • Exceed our production benchmarks by completing specific tasks within the designated timeframe
  • Handle materials by lifting, positioning, and/or removing them from the work area as needed
  • Collaborate with engineering and quality teams to improve electrical assembly procedures
  • Participate in internal audits and continuous improvement initiatives
  • Support other production areas as needed and as assigned by the supervisor
  • In coordination with PQA and Engineering Departments conduct root cause analysis and troubleshooting of potential electrical connectivity issues
  • Assist mechanical assembly operators as required
  • Other duties as assigned by the supervisor

Requirements

  • High school diploma or GED required
  • Electrical certifications or technical training
  • 3+ years of experience in electrical assembly or manufacturing
  • Experience in wind turbines, industrial, or automotive electrical systems
  • Ability to read and interpret electrical schematics and wiring diagrams
  • Experience with overhead crane operation
  • Ability to achieve and maintain crane operator certification (Required)
  • Willingness to obtain relevant electrical safety certifications
  • Familiarity with multimeters, crimping tools, and diagnostic equipment
  • Must be able to pass a respiratory fit test (as Required)
  • Working at heights
  • Demonstrate a strong understanding of and commitment to safety protocols and procedures
  • Ensure compliance with all safety regulations and company policies
  • Proactively identify and mitigate potential safety hazards
  • Properly use applicable safety equipment
  • Communicate effectively with team members and management to ensure a safe working environment
  • Speak and understand English fluently

Nice to have

Understanding of ISO 9000:2000 Quality System is a plus

What we offer

  • Paid Time Off - Three (3) weeks accrued (120 hours)
  • Medical & Pharmacy Insurance with multiple options
  • Health Savings Account (HSA) with Employer Contribution
  • Flex Spending Account (FSA)
  • Dental Insurance
  • Vision Insurance
  • Short-Term / Long-Term Disability Insurance
  • Life and AD&D Insurance
  • 401(k) with Employer Match
  • Student Debt Repayment
  • Tuition Reimbursement
  • Employee Assistance Program (EAP)
  • Parental Leave
  • Calm Subscription
  • Gym Membership Reimbursement
  • Accident Insurance
  • Legal Plans
  • Spot Pet Insurance
  • Auto and Home Insurance

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Assembly Operator- Electrical Production Technician

8 matching positions

Product Support Technician

We are seeking a Product Support Technician for our client’s Project Amplify tea...
Location
Location
United States , Beaverton
Salary
Salary:
30.00 - 34.00 USD / Hour
aquent.com Logo
Aquent
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Engineering or related fields -OR- AS plus 2 years of experience
  • Effective communication, people, and collaboration skills
  • History of conducting hardware repairs and documenting in systems
  • Bias toward action and resilience in the face of challenges
  • Experience in robotics or mechatronics is a plus
Job Responsibility
Job Responsibility
  • Work closely with the Engineering Lead to understand the hardware design and vision, then work relentlessly to ensure a healthy fleet of hardware is available at all times
  • Develop new tools, methods, and procedures to document hardware status, version history, or capture data
  • Interface with the Engineering Team to collaborate on the best approach to testing and verifying designs
  • Brainstorm on assisting with quick solutions to unforeseen issues in product or test equipment
  • Analyze and summarize hardware health, then communicate findings to the Amplify Project Team
  • Utilize electronics and mechanical aptitude to assemble, rework, and troubleshoot mechatronic systems
  • Perform functional checks on devices that may be operating outside of normal parameters
  • Correlate sensor values to their real-world implications utilizing established diagnostic tools
  • Support build operations and utilize tools ranging from manual hand tools, epoxies, heat presses, and laser cutting equipment
  • Organize, track, and maintain spare parts inventory necessary for quick turnaround repairs
What we offer
What we offer
  • Subsidized health, vision, and dental plans
  • Paid sick leave
  • Retirement plans with a match
  • Fulltime
Read More
Arrow Right

Operations Manager

The Operations Manager is responsible for overseeing all day-to-day activities a...
Location
Location
United States , Sturgis
Salary
Salary:
Not provided
harbingermotors.com Logo
Harbinger Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of experience in manufacturing, automotive, or EV operations
  • at least 5 years in a leadership or supervisory role
  • Strong understanding of vehicle repair, rework, or assembly processes
  • Demonstrated ability to lead teams in a fast-paced, hands-on environment
  • Skilled in problem-solving, root cause analysis, and process improvement
  • Excellent communication, organizational, and decision-making skills
  • Proficiency with ERP/MES systems, and production tracking tools
  • Bachelor’s degree in Engineering, Operations Management, or related field preferred but not required
  • equivalent experience accepted
Job Responsibility
Job Responsibility
  • Lead and manage a team of technicians and team leads performing electric vehicle repairs and rework
  • Ensure all repair operations meet safety, quality, and timing standards
  • Develop and maintain standard operating procedures (SOPs), work instructions, and repair documentation
  • Plan and coordinate daily shop operations including staffing, scheduling, material flow, and work assignments
  • Partner with Quality and Engineering to identify root causes and implement corrective actions for product and process issues
  • Track and report key performance indicators (KPIs) such as throughput, first-time quality, rework rate, and labor efficiency
  • Promote a culture of accountability, continuous improvement, and team development
  • Oversee facility logistics including tooling, equipment maintenance, and workspace organization
  • Collaborate with HR and leadership to recruit, train, and evaluate team members
  • Support planning and execution of new repair programs or process changes
  • Fulltime
Read More
Arrow Right

Transformer Technician

Are you passionate about energy technology and ready to take on exciting project...
Location
Location
Germany , Halle; Bad Honnef; Nauen; Neusaess
Salary
Salary:
45000.00 - 60000.00 EUR / Year
hederahiring.com Logo
Hedera Hiring Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Completed an apprenticeship or similar qualifications (e.g., Electrician, Mechatronics Technician)
  • Passion for innovative energy technologies
  • Previous experience in the service of electrical machines is a plus
  • Hold a valid driver’s license with a safe driving record
  • Ability to communicate effectively in German with the team and clients
Job Responsibility
Job Responsibility
  • Assembly and Disassembly: Install and remove transformer components such as bushings, cooler units, radiators, and expanders
  • Process Technology Operations: Work with systems and equipment in the energy production process
  • Service and Maintenance: Exchange protection, control, and regulation devices for optimal system performance
  • Participate in offshore assignments and enhance your skills in real-world, impactful projects
What we offer
What we offer
  • Competitive salary with additional overtime allowances
  • Flexible Working Hours
  • Work with a motivated team that includes both young professionals and experienced colleagues
  • 38-hour workweek, with overtime compensation for additional hours
  • 30 days of paid vacation annually
  • Access to fitness centers across Germany
  • Fulltime
Read More
Arrow Right

Manager, Stator Assembly

The Manager, Stator Assembly is responsible for building and leading stator asse...
Location
Location
United States , Austin
Salary
Salary:
Not provided
hyliion.com Logo
Hyliion
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. or M.S. in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, or related field preferred
  • MBA with relevant manufacturing or operations experience also considered
  • Equivalent technical training, military mechanical schooling or trade certification considered
  • Some supervisory or team-lead accountability
  • Hands-on experience with electromechanical assembly (stators/rotors, electric motors, generators, EV powertrains, or similar)
  • Experience with torque applications, epoxy processes, winding, ESD practices, and electrical/mechanical testing
  • Experience in pilot or low-volume build environments where processes are developed, not predefined
  • Background in aerospace, automotive EV, or high-reliability electromechanical manufacturing
  • Experience scaling operations from prototype to production
  • Proficiency in Lean manufacturing and continuous improvement (5S, Standard Work, PFMEA, root-cause analysis)
Job Responsibility
Job Responsibility
  • Lead stator assembly operations across all phases of ramp (limited production through full-rate)
  • Drive performance against Safety, Quality, Delivery, and Cost (SQDC) targets
  • Conduct daily go-see-act walks to monitor build progress, issues, and floor conditions
  • Lead daily standups and maintain weekly performance reporting to ensure alignment and transparency
  • Assign work, manage build priorities, and ensure execution aligns with production schedules
  • Partner with Manufacturing Engineering to develop and deploy standard work, work instructions, torque specifications, and traveler documentation
  • Own control plans, line balancing, and cycle-time optimization to improve throughput and efficiency
  • Drive lean manufacturing initiatives including 5S and kaizen to continuously improve operations
  • Ensure PFMEA risks are mitigated through robust process design and control plan execution rather than inspection
  • Ensure disciplined execution of all quality-critical assembly operations (e.g., winding, epoxy/cure processes, ESD controls, electrical and leak testing)
What we offer
What we offer
  • Medical Plans, with PPO or HDHP options
  • Dental Plans, with buy-up option
  • Vision Plan
  • Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
  • Short Term Disability, paid for by the company
  • Long Term Disability, paid for by the company
  • Flexible Spending Accounts (FSA)
  • Health Savings Account (HSA)
  • 401k/Roth 401k
  • Voluntary Accident Plans
  • Fulltime
Read More
Arrow Right

Manufacturing Technician

Works independently and with engineers in the development and improvement of the...
Location
Location
United States , Aguadilla
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate's degree or equivalent experience and/or 1-2 years related experience
  • Basic knowledge in the field of electro mechanical technology
  • Accountability
  • Active Learning
  • Active Listening
  • Bias
  • Business
  • Circuit Boards
  • Coaching
  • Creativity
Job Responsibility
Job Responsibility
  • Works independently and with engineers in the development and improvement of the manufacturing process
  • Collects and analyzes data relating to the manufacturing process and/or manufacturing equipment
  • Reads and interprets plans and schematics relating to the manufacturing process
  • Operates machines as needed to complete direct assembly
  • Supports factory equipment and its related processes
  • Maintains related documentation and incorporates changes throughout the manufacturing systems
  • Operates assembly equipment in the factory
  • Programs/debugs manufacturing equipment as needed
  • May conduct training classes relating to manufacturing equipment and procedures/processes
  • Covers critical responsibilities such as hardware test development, systems management, and providing technical support
What we offer
What we offer
  • Comprehensive suite of benefits that supports physical, financial and emotional wellbeing
  • Programs catered to helping you reach any career goals
  • Flexibility to manage work and personal needs
  • Celebrates individual uniqueness and inclusion
  • Equal opportunity employer
  • Fulltime
Read More
Arrow Right

Instrument Test Technician

Conducts production testing of assembled flow cytometers and related medical dev...
Location
Location
United States , San Jose
Salary
Salary:
27.00 - 30.00 USD / Hour
gomillenniumsoft.com Logo
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Min educational requirement should be AS in electronics
  • Some experience in Testing mechanicals (i.e. electronics, lasers)
  • Some experience in manufacturing work setting
  • Requires an Associate's degree (A.S.) or equivalent from two-year college or technical school
  • 3+ years related experience in a high tech, manufacturing environment
  • Ability to effectively communicate information and respond to questions both verbally and in writing
  • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry
  • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
  • Good mechanical aptitude, dexterity and hand/eye coordination. Must be able to reach, bend and lift 35 lbs on a daily basis
  • Experienced in the use of: DVM’s, Oscilloscope and general test equipment
Job Responsibility
Job Responsibility
  • Conducts production testing of assembled flow cytometers and related medical device products
  • May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications
  • Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects
  • Responsible for producing quality products on schedule
  • Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.
  • Performs final production testing and inspection to ensure products meet performance specifications and standards
  • Analyzes test results on defective units to determine root cause of failure
  • Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair
  • Compares test results with specifications and records test data and plots test results
  • Generates required documentation to complete the Device History Record (DHR)
  • Fulltime
Read More
Arrow Right

Weekend Maintenance Technician

Location
Location
United States , Whitewater
Salary
Salary:
Not provided
husco.com Logo
Husco
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • Demonstrated competency in mechanical and electrical repairs
  • Valid driver’s license and forklift certification
  • Strong troubleshooting, communication, and problem-solving skills
  • Adaptability and teamwork
  • Intermediate PC knowledge
  • Ability to lift up to 50 lbs and perform work on ladders and elevated platforms
Job Responsibility
Job Responsibility
  • Perform and Document Repairs: Conduct preventative maintenance, routine, and emergency repairs to support production and facility equipment, ensuring safety and effective communication with management and peers
  • Troubleshoot and Repair Systems: Work on mechanical, electrical, pneumatic, and hydraulic systems, including CNC machines (Okuma MA600HB/Makino a61nx-a81nx), assembly line equipment, automated assembly/test equipment, and general facility infrastructure
  • Operate Fabrication Tools: Utilize tools such as lathes, mills, and drill presses for part repair and modification
  • Industrial Waste Management: Ensure proper handling and disposal of hazardous and universal waste in compliance with regulations
  • Technical Documentation: Read and interpret technical documents, including schematics and equipment manuals
  • Independent Work: Maintain high standards of quality and efficiency while working independently
  • Suggest Improvements: Propose enhancements to equipment and manufacturing processes to improve uptime, reliability, and safety
  • Assist Engineering Team: Collaborate on special projects with the engineering team
What we offer
What we offer
  • $1,000 New Hire Bonus
  • Weekly Pay
  • $2.00 shift premium
  • Raise after 90 days
  • 10 days of paid vacation & 12 days of paid holidays
  • Health, Dental, & Life Insurance offered for full-time Employees
  • Gym/Wellness Reimbursement
  • Parental leave
  • 401K retirement contribution and company match up to 4%
  • 100% tuition reimbursement
  • Fulltime
Read More
Arrow Right

Autopak Technician

This role includes machine operator responsibility and maintenance of AutoPak eq...
Location
Location
United States , Hunt Valley
Salary
Salary:
17.00 - 21.00 USD / Hour
gomillenniumsoft.com Logo
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED & Certificate and 2 years of experience in relevant field
  • High School Diploma or GED with 4 years relevant experience required
  • Relevant Fields: Electrical / Electronics Technician, Electromechanical Technician, Mechanical Engineering Technician, Industrial Programmer, Electrician, Machine Builder / Repairer, Machinist, Refrigeration Mechanic, Welding Repairer
  • Time management skills
  • Strong interpersonal and communication skills
  • Mechanical, pneumatic and electrical skills
  • Ability to read electrical and pneumatic schematics
  • Ability to read and interpret technical manuals, blueprints, diagrams and equipment specifications
  • Flexible and adaptable
  • Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments
Job Responsibility
Job Responsibility
  • Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting for the AutoPak area
  • Controls and adjusts machine settings for AutoPak equipment
  • Responsibilities include production, quality, downtime and waste levels of machine operation
  • Perform mechanical, pneumatic and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery
  • Works within standards and operating procedures to plan, perform, and make decisions regarding the set up and operations of a variety of production equipment, including automated machine processes and controls to perform routine assembly-line production functions of filling, packing, assembling, labeling and inspecting
  • Independently run multiple lines including setting up and managing change overs
  • Provides operator support all across the assigned business operation
  • May perform clean up functions in sterilized areas and evaluate charts, follows simple diagrams, testing, and inspecting procedures
  • Conducts root-cause analysis activities for process or product exceptions
  • May monitor quality in accordance with statistical process or other control procedures
  • Fulltime
Read More
Arrow Right