Assembly Mechanic - Non-Destructive Test Job at Boeing (Berkeley)

Technical Expert Engineering, Non-Destructive Testing

Location

Canada , St-Laurent

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Hold an engineering degree or a college diploma in engineering (Materials, Metallurgy or Mechanical), with ten (10) years of experience
Certified as a NAS-410 NDT Level 3 or Level 2 in Ultrasonic testing
Certified in or have an in-depth knowledge of one of the following inspection methods: Radiography, Eddy Current, Penetrant, Magnetic Particle, and Infrared Thermography testing
Minimum of five years of experience in Ultrasonic inspection of aerospace composite material in a production environment, using automated and/or semi-automated Ultrasonic inspection systems
Knowledgeable about typical NDT aerospace codes and standards, NADCAP, and with the development of non-destructive inspection procedures
Familiar with the NDT inspection methodologies of composite materials, assemblies, aircraft structures, aerospace terminology and technical drawings
Know how to conduct NDT technical audits in-line with your field of expertise
Have shown strong leadership, problem solving, project and time/priority management skills in past assignments and require minimum supervision
Accept to travel occasionally on a last-minute notice
Have a good working knowledge of computer software such as Microsoft Office

Job Responsibility

Provide primary technical expertise and leadership in resolving manufacturing issues in the Operations, Quality, Customer Support and Supply Chain departments
Perform technical audits of suppliers and follow-up on corrective actions
Develop in-service Non-Destructive Testing (NDT) inspection procedures for various aircraft platforms
Design NDT Calibration Reference Standards for in-service use
Participate to the development of technical documents related to NDT processes
Offer NDT expertise and support to the Bombardier Experimental group for the inspection of test rigs
Perform technical reviews (Procedures, Technique sheets) of manufacturing NDT processes requiring approval
Participate to research and development projects involving new materials and emerging/advanced NDT technologies
Be required to handle difficult issues and make challenging technical decisions

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Pfd operator

You will be joining a highly skilled production team where quality and precision...

Location

United Kingdom , Broughton

Salary:

Not provided

Airbus

Expiration Date

April 30, 2026

Requirements

Formal Engineering Apprenticeship or Equivalent: Completion of a full, relevant Aerospace or Engineering Apprenticeship (e.g., Mechanical Fitting, Sheet Metal Worker, or Maintenance Fitter) or possession of an equivalent relevant technical qualification (e.g., NVQ Level 3 or HNC/HND in an engineering discipline)
NDT Level 2 Certification (Penetrant Testing - PT): Specific certification in Penetrant Testing (PT), typically to at least Level 2 in accordance with a recognised standard like EN 4179 (Aerospace), PCN (Personnel Certification in Non-Destructive Testing), or ASNT (American Society for Non-Destructive Testing)
Health and Safety Training: A robust understanding and certification in relevant Health, Safety, and Environment (HSE) standards, particularly those related to handling chemicals (the penetrant materials) and working in an industrial/workshop environment
Industry/Process Specific Experience: Demonstrable experience in an aerospace manufacturing, maintenance, repair, and overhaul (MRO), or heavy engineering environment, with practical experience in NDT techniques and quality control processes

Job Responsibility

Perform and assure structural assemblies of metallic and/or composite components following drawing requirements and applicable standards
Carry out the precise preparation of components, including both metallic and composite stacks, prior to assembly
Perform drilling, ensure structural continuity, and execute fastening of parts, applying necessary surface protections (e.g., sealant, alodine)
Strictly ensure that all operations are executed according to drawing requirements and quality standards, maintaining full traceability in the system
Apply the Environmental Management System and maintain order to guarantee a safe work area

What we offer

Competitive salary
Annual profit share
Contributory pension
Share options
Employee discounts (e.g., tax-free technology scheme, shopping discounts)
35-hour working week
Personalised development plan
Access to Airbus Leadership University
Unlimited access to over 10,000 E-learning courses
Wellbeing benefits (including 24/7 online GP and mental health support)

Fulltime

Robot Field Operator

The Robot Field Operator is on the frontlines of our robotic industrial inspecti...

Location

United States , Aurora

Salary:

Not provided

Gecko Robotics

Expiration Date

Until further notice

Requirements

Must have industry experience in power generation, pulp and paper, petrochemical, oil and gas or other like industries
or 1+ years of other relevant experience
Must have hands-on experience working with electrical and mechanical devices/tools
Must be hard working, a self-starter, confident, and highly ethical
Must possess a positive attitude, good attention-to-detail, and time-management skills
Must be able to work well with others and have communication skills that enable him/her to work with all levels of staff, vendors, and customers
Demonstrates grit, resiliency, and commitment to get the job done
Willingness to learn from everything, including failure
Team player who strives to grow with the team and make each other better
Is proud of what Gecko has to offer and represents the company with enthusiasm at customer sites

Job Responsibility

Perform in-field robotic, handheld, and other Non-Destructive Testing (UT, PT, MT, VT, etc.) inspections at customer sites
Perform all procedures and work to Gecko and customer safety policies, including wearing proper PPE
Operate robotic inspection equipment and ensure data integrity in industrial environments
Ensure highest customer satisfaction through effective communication and job execution
Maintain robotic equipment including repair, cleaning, and others while not in the field
Ensure compliance with schedule
Solicit and relay customer and product feedback for the purposes of improving quality and scope of services
Complete trip reports, expense reports, and other paperwork covering activities in the field
Maintain an up-to-date knowledge of technical details of company service offerings and tools
Use hand drill, drill press, grinder and other assembly tools as required

What we offer

company equity
401(k) matching
gender-neutral parental leave
full medical, dental, and vision insurance
mental health and wellness support
ongoing professional development
family planning assistance
flexible paid time off

Fulltime

Propulsion Manufacturing Engineer

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build...

Location

United States , Atlanta

Salary:

91800.00 - 140250.00 USD / Year

Hermeus

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Aerospace, Mechanical, or related engineering field (graduated within the last 12 months or graduating soon)
Familiarity with propulsion systems, fluid systems, and manufacturing processes through coursework or projects
Proficient in CAD and geometric dimensioning and tolerancing (GD&T)
Comfortable working hands-on with hardware, including standing, bending, and working on the shop floor
Strong communication skills and ability to read and review technical documents
Willingness to work overtime or weekends as needed
Exposure to machining, welding, precision cleaning, or inspection techniques is a plus
Ability to use first principles and engineering fundamentals to support trade studies and make sound design decisions
Interest or experience in design for manufacturability, product development, or quality systems (e.g., FMEAs, root cause analysis, QMS)

Job Responsibility

Support day-to-day manufacturing and production of our Quarterhorse vehicle, including but not limited to: Machining, TIG/MIG welding, pressure testing, precision cleaning, additive manufacturing, non-destructive testing, heat treatment, and assembly
Draft, release, and manage Work Orders related to propulsion component fabrication, assembly, and testing
Use CAD tools (e.g., NX, SolidWorks) to design propulsion layouts, fluid routing, and hardware interfaces
Create and manage Bills of Materials (BOMs) for propulsion assemblies, ground support equipment, and flight articles
Assist with proof pressure testing of tanks, lines, and propulsion subsystems in accordance with aerospace standards
Support tube bending, fitting, and assembly for complex high-pressure fluid systems used in hypersonic propulsion
Execute fluid system cleaning, drying, and verification protocols to ensure compliance with high-performance cleanliness standards
Collaborate with cross-functional teams in thermal analysis, structural design, avionics, and flight test operations

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
End of Year Bonuses
Fully stocked breakrooms
Stock Options

Fulltime

Technical Expert, Engineering, Nondestructive Testing

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Engineering degree or college diploma in engineering (Materials, Metallurgy or Mechanical)
Ten (10) years of experience
Certified as a NAS-410 NDT Level 3 or Level 2 in Ultrasonic testing
Certified in or have in-depth knowledge of one of the following inspection methods: Radiography, Eddy Current, Penetrant, Magnetic Particle, and Infrared Thermography testing
Minimum of ten (10) years of experience in Ultrasonic inspection of aerospace composite material in a production environment, using automated and/or semi-automated Ultrasonic inspection systems
Knowledgeable about typical NDT aerospace codes and standards, NADCAP, and with the development of non-destructive inspection procedures
Familiar with the NDT inspection methodologies of composite materials, assemblies, aircraft structures, aerospace terminology and technical drawings
Know how to conduct NDT technical audits in-line with your field of expertise
Shown strong leadership, problem solving, project and time/priority management skills in past assignments and require minimum supervision
Accept to travel occasionally on a last-minute notice

Job Responsibility

Provide primary technical engineering expertise and leadership in resolving manufacturing issues in the Operations, Quality, Customer Support and Supply Chain departments
Perform technical engineering audits of suppliers and follow-up on corrective actions
Develop in-service Non-Destructive Testing (NDT) inspection procedures for various aircraft platforms
Design NDT Calibration Reference Standards for in-service use
Participate to the development of technical engineering documents related to NDT processes
Offer NDT engineering-specific expertise and support to the Bombardier Experimental group for the inspection of test rigs
Perform technical engineering reviews (Procedures, Technique sheets) of manufacturing NDT processes requiring approval
Participate to research and development projects involving new materials and emerging/advanced NDT technologies
Be required to handle difficult issues and make challenging technical engineering decisions

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Aircraft Mechanic AM-2 / NDI- Level 2

The Aircraft Mechanic (UH-60, AH-64, CH-47) AM-2 / Non-Destructive Inspector (ND...

Location

United States , Colorado Springs

Salary:

42.10 - 43.36 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma or GED equivalent is Required
U.S. military technical school or specialized training course is desired
certification of education level is required
A valid (FAA) A&P certificate is preferred, not required (optional)
Three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience, and two (2) years on the assigned (AH-64, UH-60, CH-47) Mission Design Series (MDS)
A minimum of Three (3) years as an aviation inspector is preferred
All experience must be within the Six (6) most recent years
Completion of an initial Non-Destructive Inspection Level II training course and current basic qualifications
Must be trained and qualified per “NAS 410 or ASNT-CP-189” to the NDI level assigned (NDI-2)
Must possess the level of experience to inspect and determine the serviceability of aviation components, aeronautical components

Job Responsibility

Oversees and performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures
Inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis
Oversee removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components
Oversee preparation of aircraft for inspections and maintenance checks
Oversee and performs scheduled inspections and assists in performing special inspections
Oversee and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required
Oversee and use of and performs operator maintenance on tools, special tools and aircraft ground support equipment
Oversee preparation of forms and records related to aircraft maintenance
Oversee maintaining the supplies and perform preventive maintenance
Adheres to company policies and safety programs (Safety-first mentality)

What we offer

Bi-weekly accrual of 3.54 hours (0 to less than 48months)
Bi-weekly accrual of 5.07 hours (48 months but less than 108 months)
Bi-weekly accrual of 6.62 hours (108 months or more)
11 paid Holidays (outlined in CBA)
Sick Leave – 24.18 hours per year (0.93 hours bi-weekly)
Personal Paid Time - 48 hours deposited January of each year (employees hired after January will receive prorated PPT hours)
401K
Short Term / Long Term Disability
Flex Spending Programs- FSA/HSA
Employee Stock Option Purchasing Program

Fulltime

Graduate Enclosure Consultant - Diagnostics

In this position the qualified individual will investigate and determine the ser...

Location

Salary:

Not provided

Walter P. Moore and Associates

Expiration Date

Until further notice

Requirements

M.S. in Architectural Engineering or Architecture in Building Science/Building Enclosures/ Historic Preservation
Engineer in Training (EIT) or Architectural Intern track
Interest in building enclosure design, repair, retrofit and the integrated design and delivery of high performance buildings
Microsoft Office (WORD, EXCEL, POWERPOINT)
Computer Aided Drafting/Design (AUTOCAD, REVIT, Rhino, Grasshopper)
Experience with building performance modeling, software preferred (ECOTECT, VASARI, ENERGYPLUS, EQUEST, DESIGNBUILDER, DIVA, IES-VE, THERM, WUFI)
Familiarity with exterior wall systems
Familiarity with roofing assemblies
Familiarity with building structural systems
Experience with working on suspended scaffolding and vertical heights

Job Responsibility

Investigate and determine the service life of building enclosure assemblies
Assess enclosure systems, and design repairs for existing enclosure systems
Perform enclosure review to assess air infiltration, rain water control, heat transfer, and vapor transmission
Perform building performance analysis including evaluate daylighting, solar heat gain, thermal energy transfer, and holistic integration of the enclosure with building mechanical, lighting, and plumbing systems
Assist Project Manager with project tasks
Review and organize project-related documents
Research building codes and industry standards
Write assessment reports
Perform field investigations, including non-destructive testing, travel required
Performance modeling of enclosure assemblies using different software

What we offer

competitive compensation and benefit packages

Jr structure technician professional

Job Description For External Posting

Location

Brazil , Itajubá

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Complete technical education
Valid CHT in Cell
Experience in structural work in metallic materials

Job Responsibility

Carry out structural parts assembly services, adjust aircraft component fairings and assemble various options, in accordance with the instructions contained in the technical data accepted and approved for carrying out these services
Comply with the requirements set out in the Maintenance Organization Manual (MOM) and the Quality Control Manual (MCQ) for services carried out in maintenance workshops
Use methods, techniques and practices established in the latest revision of the manufacturer's maintenance manual, or in the instructions for continued airworthiness prepared by the manufacturer or other methods, techniques and practices approved by Helibras
Assist PL/SR Structural Technicians and Structural Specialists in carrying out structural repairs on aircraft, providing the necessary tools to carry out the services, preparing the work area and returning the tools used to the tool tent at the end of the service
If not qualified as an aircraft maintenance mechanic according to RBAC 65, perform the services under the supervision of an aircraft maintenance mechanic qualified by ANAC
Submit the work carried out to the Supervisor for examination and approval for return to service (APRS)
Carry out inspections using non-destructive testing techniques, if qualified
Record the services carried out and/or supervised in accordance with current legislation, using the forms defined by the company through the MOM/MCQ and ensure that all the relevant records for the service have been made before considering the service completed
Keeping their workstation clean and tidy, collecting all the debris produced during their work at the end of the day and depositing it in a suitable place, and cleaning, organizing and storing all the tools used during their work
Work in technical support services for innovation activities, through the implementation and maintenance of facilities or equipment intended for the execution of research, development or technological innovation projects

What we offer

Medical and dental assistance
Food vouchers
Lunch in the in-house restaurant
Chartered transportation
Transport voucher
Differentiated life insurance
Payroll loan
PPR
Airbus share purchase program
Partnerships with pharmacies, schools, universities, gyms, among others

Fulltime

Assembly Mechanic - Non-Destructive Test

Boeing

Location:
United States , Berkeley ▼
Hazelwood

Category:
Manufacturing

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 03, 2026

Expiration:
March 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Assembly Mechanic - Non-Destructive Test

Technical Expert Engineering, Non-Destructive Testing

Pfd operator

Robot Field Operator

Propulsion Manufacturing Engineer

Technical Expert, Engineering, Nondestructive Testing

Aircraft Mechanic AM-2 / NDI- Level 2

Graduate Enclosure Consultant - Diagnostics

Jr structure technician professional

Assembly Mechanic - Non-Destructive Test

Boeing

Location:United States , Berkeley ▼Hazelwood

Category:Manufacturing

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 03, 2026

Expiration:March 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Assembly Mechanic - Non-Destructive Test

Technical Expert Engineering, Non-Destructive Testing

Pfd operator

Robot Field Operator

Propulsion Manufacturing Engineer

Technical Expert, Engineering, Nondestructive Testing

Aircraft Mechanic AM-2 / NDI- Level 2

Graduate Enclosure Consultant - Diagnostics

Jr structure technician professional

Location:
United States , Berkeley ▼
Hazelwood

Category:
Manufacturing

Contract Type:
Employment contract

Job Posted:
March 03, 2026

Expiration:
March 16, 2026