Assembler 3, Instrument Job at MillenniumSoft Inc (Zelienople)

Assembler 3, Instrument

General Assembler 3 position for a Medical Devices Company. Disinfects devices u...

Location

United States , Zelienople

Salary:

14.00 - 18.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Requires the demonstrated ability to interpret and comprehend specifications, procedures, and use of hand tools
Must be able to successfully pass training requirements of federal or local regulatory programs to the position, if required
Must be able to develop skills at an acceptable rate
Possess mechanical ability and familiarity with hand tools and facility equipment
Must be able to maintain appropriate documentation related to product servicing
Demonstrate a high level of motivation to support overall team objectives

Job Responsibility

Disinfects devices upon arrival and where necessary assembles and disassembles product preparing devices/accessories for servicing
Works from documented procedures, work instructions, engineering drawings, or sketches as defined in the Bard Electronics Quality System
Disinfection of returned product from customer locations
Must be capable of using protective clothing at various times during the disinfection process per instructions
Heavy lifting (100 pounds with assistance) removing product from packaging
Data Entry keyboarding skills
Assemble components per written instruction
Technical competence
Fosters Continuous Improvement in training and all other areas of team performance
Performs job with minimal supervision

Fulltime

Instrument Assembler 3

Contract position for an Instrument Assembler 3 at a Medical Devices Company in ...

Location

United States , Sparks

Salary:

18.00 - 21.50 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

More than two years of manufacturing assembly experience
Effective communication skills at a level co-workers and Team Lead/Supervisor can understand
Ability to read, write, interpret and comprehend specifications written in English and perform basic math calculations
Ability to use basic tools of measurement, such as microscopes
Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis
Has good attention to detail
Ability to get along with people and be able to work in a team environment
Willingness to rotate into different tasks and responsibilities
High school diploma or equivalent

Job Responsibility

Performs any combination of tasks involved in the fabrication, manufacture, assembly, testing and packaging of medical devices
Setting up, operating, performing maintenance on and troubleshooting equipment
May conduct quality inspections on processing line in accordance with quality specifications
Works within clearly defined SOPs and / or scientific methods and adheres to quality guidelines

Fulltime

Instrument Assembler 1

Support manufacturing operations by maintaining proper supplies of major and min...

Location

United States , Sumter

Salary:

Not provided

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Minimum 2–3 years of manufacturing experience required
Experience in production, assembly, material handling, or industrial environments preferred
Experience working in physically demanding environments is a plus
High School Diploma or GED required
Ability to work rotating 12-hour shifts
Comfortable working in varying temperature environments
Ability to work around chemical dust exposure

Job Responsibility

Maintain supplies of major and minor ingredients in designated bins and hoppers
Ensure oil systems and process oil supplies are maintained for production needs
Supply minor ingredient bags to the 2nd-floor Banbury production area
Maintain proper lot and batch traceability records
Keep work areas clean, organized, and free from contamination risks
Dispose of waste and trash in assigned areas following company procedures
Maintain equipment cleanliness, especially around oil, cardboard, dust, and foreign materials
Follow all safety, environmental, and QSR procedures
Frequently lift, push, and pull materials over 50 lbs without assistance
Use stairs and steps frequently during daily operations

Fulltime

Production technician instrument assembler

The Production Technician performs manufacturing and assembly tasks that support...

Location

United States , Hercules

Salary:

22.00 USD / Hour

Tucker Parker Smith Group

Expiration Date

Until further notice

Requirements

High school diploma or equivalent preferred
0–3 years of manufacturing, assembly, or production experience
Ability to read and follow written work instructions
Basic math, computer, and problem-solving skills
Strong attention to detail and quality
Ability to work in a team-oriented production environment

Job Responsibility

Perform manufacturing and assembly operations using manual or automated equipment
Assemble components, kits, or instruments according to production instructions
Dispense, package, cap, and label products as required
Perform visual inspections and quality checks on finished products
Complete required documentation following Good Documentation Practices (GDP)
Maintain organized workstations and follow 5S practices
Monitor materials and inventory at production stations
Report production issues or abnormalities to supervisors
Follow safety, PPE, and GMP quality system requirements

Fulltime

New

Optomechanical Design Engineer III

OSS is seeking a talented Optomechanical Design Engineer III to support the desi...

Location

United States , Louisville

Salary:

92794.67 - 161351.92 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

Bachelor's degree or higher in Optical Sciences, Optical Engineering, Mechanical Engineering, Aerospace Engineering, or a closely related field, plus 5–7 years (BS), 3–5 years (MS), or 0–2 years (PhD) of professional experience in optomechanical or precision mechanical engineering roles
Demonstrated experience designing optomechanical structures and assemblies for optical instruments, including lens barrel housings, detector mounts, optical benches, or telescope structures
Proficiency with SolidWorks (with PDM) for 3D modeling, assembly management, and 2D drawing creation
experience with GD&T per ASME Y14.5
Familiarity with athermal design principles including CTE mismatch analysis, passive focus compensation, and bondline thickness sizing for space-grade adhesives
Experience with tolerance stack-up analysis and optical sensitivity matrices supporting alignment and wavefront error budgets

Job Responsibility

Design and develop optomechanical structures, mounts, housings, and assemblies for space-qualified EO/IR payloads
Generate CAD models, assemblies, and detailed production drawings in SolidWorks, performing tolerance stack-up analyses and applying geometric dimensioning and tolerancing (GD&T)
Perform analytical assessments including athermal design, CTE mismatch analysis, bondline thickness sizing, lens retention preload, and kinematic mount design
Design and analyze flexure-based mechanisms, alignment fixtures, focus mechanisms, and vibration isolation systems appropriate for the launch and on-orbit environment
Support optical alignment procedures, develop alignment tolerancing budgets, and coordinate with optical engineers on WFE, centration, and tilt sensitivity matrices
Collaborate with AI&T to develop integration and alignment procedures, verify as-built performance, and support environmental test campaigns (vibration, thermal vacuum, shock)
Apply space qualification standards (NASA-STD, MIL-STD, GEVS, ASTM E595 et al.) to material selection, adhesive selection, and design for outgassing and radiation tolerance
Work closely with systems, structural, thermal, electrical, and program management teams in a cross-functional IPT environment with a strong internal customer focus
Contribute to design reviews (SRR, PDR, CDR, MRR) and generate supporting documentation including design reports, ICDs, trade studies, and material justification records

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs

Fulltime

New

Engineering Technician III

Astrion has an exciting opportunity for an Engineering Technician III for the RT...

Location

United States , Huntsville

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

5 years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization
or 2 years of applicable college/vocational/military/technical school and 3 years of applicable experience in the assigned specialty area
and the following additional requirements: Instrumentation – Experience must include successful completion of sixteen (16) weeks of civilian or military training in electronics or basic instrumentation techniques and a minimum of 2 years of experience in electronics/instrumentation supporting engineering or testing of military hardware.
Must be able to obtain and maintain a Secret Government security clearance. (Must be a U.S. Citizen.)
Must be able to pass pre-employment drug screening.
Must have a valid driver's license.

Job Responsibility

Work with a team of technicians and engineers to construct, test, troubleshoot, and assemble all components of Telemetry/Flight Termination (TM/FTS) kits.
Construct and test cables and wiring harnesses from drawings.
Use drawings, general and special test equipment to test cables, wiring harnesses, populated printed circuit boards, receivers, and transmitters.
Use drawings, general and special tools and test equipment to assemble, test, and troubleshoot TM/FTS kits.
Integrate TM/FTS kits into missiles prior to test missions.
Setup, test, and troubleshoot TM/FTS installation
and verify receipt of telemetry data in support of missile test mission.
~20% travel for qualification and mission support.

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

New

Millwright - Maintenance

Embark on an exciting career as a Millwright, where you'll take charge of instal...

Location

United States , Sinton

Salary:

26.00 - 30.00 USD / Hour

Lexicon, Inc

Expiration Date

Until further notice

Requirements

A minimum of 3 years’ experience as a millwright is required
Must have all the required hand tools
Ability to read and comprehend blueprints, layout plans, or other drawings is required
Proficient with precision instruments to set and align equipment is required
You must be legally Authorized to work in the United States for our company without the need for current or future visa sponsorship
Certificate of welding ability is preferred

Job Responsibility

Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs
Repair and lubricate machines and equipment
Assemble and install equipment, using hand tools and power tools
Assembles machines, bolts, welds, or otherwise fastens them to foundation or other structures
Installs machinery and equipment according to layout plans, blueprints, and other drawings, using hoists, lift trucks, hand tools and power tools
Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures
Dismantles machines and other equipment
Constructs foundation for machines, using hand tools and building materials such as wood, cement, and steel
Move machinery and equipment, using hoists, dollies, rollers, and trucks
Responsible for adhering to all company safety and QA/QC programs and OSHA regulations

What we offer

Health, Dental, Vision, and Life Insurance
HSA with employer contributions
Life Insurance
Paid Holidays and Vacation
401k with company match
Lexicon University
ESOP

Fulltime

New

Manufacturing Engineering Technician, Instruments

Location

United States , Austin

Salary:

Not provided

Diasorin

Expiration Date

Until further notice

Requirements

Associate's Degree Associate degree in electrical engineering, electronics or mechanical discipline required
6+ Years Experience in electro-mechanical assembly/test manufacturing. required
3+ Years Experience in Soldering. preferred
Familiarity with ISO 13485 and FDA Quality System requirements desired
Familiarity with Enterprise Manufacturing systems such as Oracle or SAP desired
Familiarity with Microsoft Word and Excel
Effective oral and written communication skills
Ability to handle the pressure of meeting tight deadlines and adapting to rapidly changing priorities
High electrical and mechanical aptitude
Well-developed problem solving/troubleshooting skills

Job Responsibility

The assembly, integration of mechanical, fluidic, electronic, optical, electro-mechanical systems and plastic and liquid mechanical systems
Delivering manufacturing requirements against production or project schedules within a focused manufacturing operation
System integration testing and troubleshooting for all products in support of quality manufacturing production
Product knowledge, documentation transfer, training and inter-departmental communication
Performing assigned tasks that utilize their interdisciplinary skills to perform integration troubleshooting and assigned service tasks
Calibration and maintenance of all test fixtures, tools and manufacturing aides
Performing assigned tasks with minimal oversight and utilize their interdisciplinary skills to perform independent development, troubleshooting and field service tasks
Work with technicians and manufacturing engineers daily in support of integration testing, manual instruction development and production process development
Coordinate with other technicians daily in support of integration testing, manual instruction development and production process development
Test and troubleshoot systems and test fixtures and provide feedback to engineers

What we offer

Competitive salary and benefits package

Fulltime

Select Country

Assembler 3, Instrument

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Assembler 3, Instrument

Assembler 3, Instrument

Instrument Assembler 3

Instrument Assembler 1

Production technician instrument assembler

Optomechanical Design Engineer III

Engineering Technician III

Millwright - Maintenance

Manufacturing Engineering Technician, Instruments

Our AI answers in your language