Apprentice Aircraft Maintenance Technician Job at 360 Resourcing Solutions (Lasham)

Aircraft Maintenance Technician Apprentice

Aircraft Maintenance Technician Apprentice role for Summer 2026 at Bombardier's ...

Location

United States , Wichita

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Entering Junior or Senior year of high school, at least 16 years of age
Passing grades from the previous year of schooling (2.5 GPA or above)
Maintain regular attendance and are punctual
Able to work between 20 and 32 hours per week
Available for minimum of 6 weeks, possibility to extend, based on performance and initiative
Complete on-the-job-training and any required reading in a timely manner
Possess basic computer skills necessary to perform job function (Microsoft Office)

Job Responsibility

Adhere to General Work and Safety Requirements
Willing participant to both class room and On the Job training (Aircraft Systems and Structure)
Assist with pre/post experimental test inspections as trained
Assist with maintenance on experimental aircraft
Assist with aircraft ballast changes
Assist with installation of instrumentation, strain gauges, and accelerometers
Assist with aircraft towing, weighing, and related activities (Observer only)
Assist Mentor with release and recovery aircraft on taxi ramp
Assist with removal and re-installation of aircraft components, which obstruct the performance of assigned tasks
Maintain company tools, equipment, and work areas to department and company standards

Parttime

Electronics Technician

This position, located at Eglin AFB, FL, involves applying technical knowledge t...

Location

United States , Eglin AFB

Salary:

Not provided

TDX

Expiration Date

Until further notice

Requirements

High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics – or – equivalent military training (highly desired)
Associate’s degree in Electronics and experience at the Craftsman level highly desirable
Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired - NOT DISQUALIFYING
Six (6) years’ experience at the journeyman level is highly desired
Flight line experience highly desired – NOT DISQUALIFYING
This job requires the physical capability to lift, maneuver, and carry ACTS pods in a variety of environments, including shop, warehouse, bay, and flight-line
US Citizen // Secret Clearance or ability to obtain
Must have a U.S. Passport and appropriate visas
Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit
Must be able to travel to other countries in support of TDY operations

Job Responsibility

Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
Assist with Ground Station/Live Monitor/RRU maintenance as required
Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
Perform system installation, preparation for use and reshipment
Identify and report corrections/improvements to technical data
Identify and report product quality/material deficiencies
Identify and report supply discrepancies
Transport, install, and remove Pods, including ancillary equipment
Verify proper subsystem electro-mechanical interfaces with aircraft

What we offer

health
dental
vision
401K

Fulltime

Electronics Technician Supervisor

The Electronics Technician (ET) Supervisor will be responsible for working with ...

Location

Antarctica , McMurdo Station

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

Valid USA passport
Ability to obtain a T1 Clearance through the government customer
Must pass internal background checks
Valid driver’s license
Ability to perform job duties in extreme, cold, dark, work environments
Must pass medical and dental examination prior to deployment
Knowledge and experience performing hardware maintenance, including replacing and/or repairing hard drives, motherboards, video cards, RAM, CPU, monitors, power supplies, network cards, printers and other peripherals
Ability to follow directions and work independently or with a team
Ability to be reliable in attendance/punctuality
Ability to practice and promote required safety standards

Job Responsibility

Coaches and trains staff in established quality processes, procedures and expected project deliverables
Leads, supervises and mentors assigned staff
Provides training and direction for ensuring the achievement of maximum performance with high standards and exercises supervisory personnel management responsibilities
Oversees staff and exercises supervisory personnel management responsibilities
Required travel to Antarctica up to 6 months a year
Works closely with the government project manager and supports the needs of the program at the sponsor level or with program stakeholders
Coordinates workshops and meetings, develops agenda items, participates in planning sessions, generates meeting minutes, and tracks action items as required
Recommends policies, doctrine, tactics, and procedures
Coordinates and interfaces with various Department of Defense (DoD), non-DoD, and international participants located in and out of the continental United States (CONUS)
Provides subject material to develop technical documentation, provides consultation to management personnel, or prepares and conducts training on matters relating to Aviation Command and Control projects, services or projects and research unique to the polar environments

What we offer

Medical
Dental
Vision
401(K) Immediate Vesting
Professional Development Assistance
Legal Aid Assistance Program
Family Planning / Fertility Assistance
Personal Time Off
Observance of Federal Holidays
Company Life Insurance

Fulltime

Air Combat Training Systems Electronic Technician

This job, located at Andersen AFB, Guam, supports Air Combat Training System (AC...

Location

United States , Yigo

Salary:

30.00 - 32.00 USD / Hour

TDX

Expiration Date

Until further notice

Requirements

High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics
equivalent military training (highly desired)
Associate’s degree in Electronics and experience at the Craftsman level highly desirable
Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired
Six (6) years’ experience at the journeyman level is highly desired
Flight line experience highly desired
US Citizen
Secret Clearance or ability to obtain
Must have a U.S. Passport and appropriate visas
Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit

Job Responsibility

Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
Assist with Ground Station/Live Monitor/RRU maintenance as required
Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
Perform system installation, preparation for use and reshipment
Identify and report corrections/improvements to technical data
Identify and report product quality/material deficiencies
Identify and report supply discrepancies
Transport, install, and remove Pods, including ancillary equipment
Verify proper subsystem electro-mechanical interfaces with aircraft

What we offer

health
dental
vision
401K

Fulltime

Air Combat Training Systems Electronic Technician

This job, located at Andersen AFB, Guam, supports Air Combat Training System (AC...

Location

United States , Yigo, Guam

Salary:

30.00 - 32.00 USD / Hour

TDX

Expiration Date

Until further notice

Requirements

High School Diploma and successful completion of an accredited Technical Apprentice Program in Electronics
equivalent military training (highly desired)
Associate’s degree in Electronics and experience at the Craftsman level highly desirable
Three (3) years Air Combat Maneuvering Instrumentation (ACMI) or Air Combat Training Systems (ACTS) experience highly desired
Six (6) years’ experience at the journeyman level is highly desired
Flight line experience highly desired
US Citizen
Secret Clearance or ability to obtain
Must have a U.S. Passport and appropriate visas
Applicants must have a valid state driver’s license and meet requirements for a flight-line driving permit

Job Responsibility

Schedule and perform periodic, preventive, and corrective Airborne Subsystem (Pod) maintenance (including ancillary equipment)
Respond to notification of malfunctioning Airborne Subsystems/pods, including applicable ancillary equipment, as well as Range Remote Unit (RRU) functions
Assist with Ground Station/Live Monitor/RRU maintenance as required
Troubleshoot and repair to restore the AS/pods and RRUs to full functionality
Perform system installation, preparation for use and reshipment
Identify and report corrections/improvements to technical data
Identify and report product quality/material deficiencies
Identify and report supply discrepancies
Transport, install, and remove Pods, including ancillary equipment
Verify proper subsystem electro-mechanical interfaces with aircraft

What we offer

health, dental, vision and 401K

Fulltime

Electronics Technician Supervisor

The Electronics Technician (ET) Supervisor will be responsible for working with ...

Location

Antarctica , McMurdo Station

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

A valid USA passport is required and is reimbursable
Must be able to obtain a T1 Clearance through the government customer
Must pass internal background checks
Must have a valid driver’s license
Must be able to perform job duties in extreme, cold, dark, work environments
Must pass medical and dental examination prior to deployment
expenses are reimbursable
Knowledge and experience performing hardware maintenance, including replacing and/or repairing hard drives, motherboards, video cards, RAM, CPU, monitors, power supplies, network cards, printers and other peripherals
Ability to follow directions and work independently or with a team
Ability to be reliable in attendance/punctuality

Job Responsibility

Coaches and trains staff in established quality processes, procedures and expected project deliverables
Leads, supervises and mentors assigned staff
Provides training and direction for ensuring the achievement of maximum performance with high standards and exercises supervisory personnel management responsibilities
Oversees staff and exercises supervisory personnel management responsibilities
Required travel to Antarctica up to 6 months a year
Works closely with the government project manager and supports the needs of the program at the sponsor level or with program stakeholders
Coordinates workshops and meetings, develops agenda items, participates in planning sessions, generates meeting minutes, and tracks action items as required
Recommends policies, doctrine, tactics, and procedures
Coordinates and interfaces with various Department of Defense (DoD), non-DoD, and international participants located in and out of the continental United States (CONUS)
Provides subject material to develop technical documentation, provides consultation to management personnel, or prepares and conducts training on matters relating to Aviation Command and Control projects, services or projects and research unique to the polar environments

What we offer

Medical
Dental
Vision
Company Life Insurance
Short-Term and Long-Term Disability Insurance
401(K) Immediate Vesting
Professional Development Assistance
Legal Aid Assistance Program
Family Planning / Fertility Assistance
Personal Time Off

Fulltime

Resident Assistant

If you’re looking for a job that goes beyond the basics to deliver purpose and j...

Location

United States of America , Hillsboro

Salary:

18.00 - 20.00 USD / Hour

Leisure Care

Expiration Date

Until further notice

Requirements

Demonstrated experience in a caregiving role
Current CNA a plus!

Job Responsibility

Assists resident with activities of daily living (ADL's) and all personal care skills (bathing, dressing, grooming, toileting)
Makes appropriate observations about the resident’s condition in every interaction
Records and follows-up with changes in resident’s condition in a timely manner
Assists residents with laundry and housekeeping services as needed

What we offer

Medical, Dental and Vision
Early Wage Access (access to earned wages when needed!)
401k
10 days vacation & 1 hour Sick Leave earned for every 30 hours worked
Bereavement & Jury Duty Leave
6 Holidays
2 Float Holidays
Flexible Spending Accounts (Health and Dependent Care)
Meal Discounts
Tuition Assistance

Fulltime

Traffic Management CAD Technician

FM Conway is currently recruiting a Traffic Management CAD Technician to join ou...

Location

United Kingdom , Ipswich

Salary:

Not provided

360 Resourcing Solutions

Expiration Date

July 04, 2026

Requirements

Strong knowledge of Traffic Management operations
experience using CAD, BricsCAD and Cone 11 software
ability to read and translate blueprints and technical drawings
ability to work well under pressure, prioritise tasks effectively and have excellent attention to detail
M7 Lantra qualification is highly desirable, but not essential

Job Responsibility

Working within a team of Traffic Management development designers and Project Engineers to ensure that drawings are to a high and legal standard
Producing clear drawings, signage placement layouts and diversion route strategies
Developing safe and efficient traffic management plans for work sites and road network
Carrying out on site assessments as required
Designing sites in accordance with Chapter 8 TSM
Engaging with Project Teams & Engineers to respond effectively to working methods that require traffic Management designs that conform to a legal standard

What we offer

Career and professional development
23 days holiday plus bank holidays
Life assurance
Opportunities for internal and external training
Access to a wide range of shopping discounts through Rewarding Great People platform
Health and well-being benefits including 24-hour advice lines
Support from in-house mental health first aiders

Fulltime

Select Country

Apprentice Aircraft Maintenance Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?