Aircraft Worker Job at Amentum (Mayport)

New

Aircraft Worker

The Aircraft Worker performs pre/post-operational checks, fueling and operation ...

Location

United States , San Diego

Salary:

39.08 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Minimum two (2) years of actual and recent aircraft maintenance/modification/repair experience on H-60s is required or equivalent rotary aircraft experience
Must be able to obtain and maintain a Common Access Card (CAC) with a Tier 3 adjudication
Knowledge and use of special tools/equipment required to perform assigned maintenance tasks is mandatory
Must have a valid Driver's License
Must have ability to meet physical demand requirements associated with and/or pass and maintain any medical examination requirements related to performing daily routine aircraft maintenance tasks
Position may require the ability to pass and maintain a U.S. Government background security check
Must be able to speak, read, write and understand English
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location
Position will require to complete (PQS) Personal qualification standards as needed

Job Responsibility

Performs aircraft movement, aircraft fuel/defuel, aircraft/rotor system tie down, install/uninstall blade restraints
Securing aircraft and blades, servicing aircraft/engines/transmissions, and directing maintenance turns
Provide aircraft movement/direction, fire guard services during ground and flight operations
Be familiar with all maintenance instruction manuals
Launch and recover aircraft in support of activity's flight schedule including helicopter landing signal services at site or at Naval Air Facility OLF
Use standard aircraft handling and taxi procedures, Standardization (NATOPS), specific aircraft manual, and local regulations
Detect corrosion and be familiar with the corrosion control manual
Perform equipment pre-operational check and maintenance of all work center support equipment/IMRL
operate ground support equipment such as electrical power supply, tow tractors, light carts and engine starting units
check for fuel contamination by draining samples from low point drains

What we offer

medical insurance
dental insurance
vision insurance
401(k) retirement plan
life insurance
long-term disability insurance
short-term disability insurance
5.54 hours of paid time off biweekly
11 paid holidays annually
$8.00 per hour, up to 40 hours per week, for Health and Welfare

Fulltime

New

Aircraft Worker

Purpose and Scope: Makes repairs to aircraft following orders of higher grade wo...

Location

United States , Mayport

Salary:

34.15 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or GED
Valid driver's license
Three (3) years’ actual and recent related experience in the field consistent with the requirements set forth in the contract/delivery order
An A&P license shall be considered equivalent to three (3) years’ experience within the aircraft field
Position may require the ability to pass and maintain a Security Clearance
Position may require travel
Must be able to obtain and maintain facility credentials/authorization
US Citizenship is required for facility credentials/authorization at this work location

Job Responsibility

Makes repairs to aircraft following orders of higher grade worker
Removes, cleans, reinstalls, or replaces defective parts, accessories, and components such as worn gaskets, couplings, and fittings
bad actuators, accumulators, gauges, sections of corroded fuel and oil lines, worn cable pulleys, frayed spark plug cables, and burned-out landing lights, using hand tools
Makes adjustments and settings such as cable tension and seat movement settings and adjustments
Obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and spark plug cables and harnesses by referring to parts manuals and by making comparisons with samples
Services engines and aircraft components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Aircraft Worker

Repairs, maintains, and inspects aircraft structures, systems, components, and r...

Location

United States , Eglin AFB

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Completion of a basic applicable aircraft maintenance course is mandatory
Qualification as Aircraft Worker is mandatory
A minimum of three years of performing functions, such as installing, inspecting, repairing or overhauling aircraft structures, systems, and components, is mandatory
Must be a fully qualified AR technician
Must have held an Air Force F-15 Crew Chief AFSC
Must possess required qualifications in attached job description i.e. flight controls / canopy rigging
Must be able to travel in performance of these duties
SECRET CLEARANCE REQUIRED
Knowledge of the principles applying to aircraft systems, concepts and applications of maintenance directives and data reporting, and using technical data is mandatory
Knowledge of Air Force supply and deficiency reporting procedures and the proper handling, use, and disposal of hazardous waste and materials is mandatory

Job Responsibility

Repairs, maintains, and inspects aircraft structures, systems, components, and related equipment under technical direction
Removes and installs aircraft components
Conducts functional tests of repaired components and systems
May be required to adjust, align, and rig aircraft systems
May be required to perform aircraft jacking, lifting, and towing operations
Inspects and identifies aircraft corrosion for prevention and repair
May be required to perform crash recovery duties
Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification

Fulltime

Aircraft Worker (EE)

Repairs, maintains, and inspects aircraft structures, systems, components, and r...

Location

United States , Eglin AFB

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Completion of high school with courses in mathematics is desirable
Completion of a basic applicable aircraft maintenance course is mandatory
Qualification as Aircraft Worker is mandatory
A minimum of three years of performing functions, such as installing, inspecting, repairing or overhauling aircraft structures, systems, and components, is mandatory
Must be familiar with tactical aircraft E&E backshop processes and procedures
Must know servicing and maintenance of Oxygen/nitrogen carts, LOX servicing and battery shop operations
Must be familiar with Oxygen room operations to include servicing and maintaining oxygen equipment
Must be able to Operational check, remove/replace/repair/install/components, assemble/disassemble, bench-check, service, AC and DC power system, integrated drive generator (IDG), generator control unit (GCU), external power system, interior and exterior lighting systems
Remove install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems
You must have held an Air Force E&E AFSC or sister service equivalent and have a minimum four (4) years documented experience, preferably within the last ten (10) years, experience on F-15C/D/E or F-16 aircraft

Job Responsibility

Repairs, maintains, and inspects aircraft structures, systems, components, and related equipment under the technical direction of an Aircraft Mechanic, Aircraft Mechanic (Senior) or Lead
Removes and installs aircraft components
Conducts functional tests of repaired components and systems
May be required to adjust, align, and rig aircraft systems
May be required to perform aircraft jacking, lifting, and towing operations
Inspects and identifies aircraft corrosion for prevention and repair
May be required to perform crash recovery duties
Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification

Fulltime

Sheet Metal Worker

Base maintenance environment working on live aircraft

Location

United Kingdom , Doncaster

Salary:

30.00 GBP / Hour

JMC Aviation

Expiration Date

Until further notice

Requirements

Base Maintenance experience
Sheet Metal Worker experience
Right to work in the UK
Up-to-date documentation – EWIS 4+5, FTS 1+2, HF Initial and Refresher, SMS Certificates
Foamed toolbox with full inventory and etching

Job Responsibility

Base maintenance environment working on live aircraft

What we offer

Industry-leading compliance support
Fast onboarding and documentation assistance
Dedicated recruitment consultant
Placements across the globe
Extensive experience and knowledge of the aviation sector

New

Ground Support Equipment Mechanic

The Ground Support Equipment Mechanic diagnoses malfunctions and repairs Ground ...

Location

United States , Jacksonville

Salary:

Not provided

Amentum

Expiration Date

June 16, 2026

Requirements

6 plus years’ experience working on GSE Equipment
Must have a high school diploma
Must be able to speak, read and understand English
Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks, Respirator, Corrosion Control, and Blasting
There is a great deal of standing, climbing, bending and stooping
Must be able to lift up to 50 pounds
Must be able to obtain an approved status from the Contractor Verification System which includes a 7 year back ground check and obtain Defense Biometric Identification System (DBIDS) ID for base access
Must have a valid Driver's License
Must be able to possess and maintain tools required on a minimum tool listing within 30 days of hire date
Negative pre-employment drug screening

Job Responsibility

diagnoses malfunctions and repairs Ground Support Equipment (GSE)
advises and trains lower grade workers on diagnosis and repair of less complex repair/maintenance problems
inspects and approves completed maintenance actions
solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications
uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions
analyzes, diagnosis, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools
maintains external fuel and grounding systems
performs scheduled and unscheduled maintenance on GSE
inspects, tests, and operates GSE to determine equipment serviceability and proper operation
services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air

Fulltime

!

Ground Support Equipment Mechanic

The Ground Support Equipment Mechanic diagnoses malfunctions and repairs Ground ...

Location

United States , Jacksonville

Salary:

Not provided

Amentum

Expiration Date

June 12, 2026

Requirements

6 plus years’ experience working on GSE Equipment
Must have a high school diploma
Must be able to speak, read and understand English
Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks, Respirator, Corrosion Control, and Blasting
There is a great deal of standing, climbing, bending and stooping
Must be able to lift up to 50 pounds
Must be able to obtain an approved status from the Contractor Verification System which includes a 7 year back ground check and obtain Defense Biometric Identification System (DBIDS) ID for base access
Must have a valid Driver's License
Must be able to possess and maintain tools required on a minimum tool listing within 30 days of hire date
Negative pre-employment drug screening

Job Responsibility

Diagnoses malfunctions and repairs Ground Support Equipment (GSE)
Advises and trains lower grade workers on diagnosis and repair of less complex repair/maintenance problems
Inspects and approves completed maintenance actions
Solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications
Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions
Analyzes, diagnoses, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools
Maintains external fuel and grounding systems
Performs scheduled and unscheduled maintenance on GSE
Inspects, tests, and operates GSE to determine equipment serviceability and proper operation
Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air

Fulltime

!

Sheet Metal Worker

We are Ryanair Engineering Germany GmbH. Based at Berlin Brandenburg Airport BER...

Location

Germany , Berlin; Nuremberg

Salary:

Not provided

Ryanair - Europe's Favourite Airline

Expiration Date

Until further notice

Requirements

Must hold demonstrable experience of Sheet Metal Work and Structural Repair
Previous maintenance experience on B737 is highly desirable
Knowledge of technical drawing
Flexible approach to working in fast changing environment
Must be flexible, including availability to work overtime as and when required
Ability and willingness to train non-skilled personnel
Excellent communication skills – fluent English is essential
Good computer literacy
Willing to work shift
A valid EU/EEA passport with the unrestricted right to live and work in the European Union (VISA Support unavailable for this position)

Job Responsibility

Aircraft body structure and parts repair on Ryanair fleet aircraft, in according with approved maintenance data and procedures
Performing metal assembling operations such as cutting, filling, drilling, countersinking, fitting, shimming, adjusting, clamping, bolting, reaming, riveting and bucking work
Working with, amongst others, relevant equipment -Bending machines, English Wheel, Flap Peening, Drill or Grinder as usual working tools
To find the most suitable repair solutions and implementation in according to the Maintenance Repair Manuals
Any other duties as requested by your Shift Leader / Hangar Manager

What we offer

Direct and permanent employment with a German contract
Career possibilities in Ryanair Group
Payment of shift credits starting from 8pm
Working gear and tools will be provided
Shopping discounts
Monthly charged Sodexo Shopping Card
Free English & German courses

Fulltime

Select Country

Aircraft Worker

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Aircraft Worker

Aircraft Worker

Aircraft Worker

Aircraft Worker

Aircraft Worker (EE)

Sheet Metal Worker

Ground Support Equipment Mechanic

Ground Support Equipment Mechanic

Sheet Metal Worker

Our AI answers in your language