CrawlJobs Logo

Aircraft Electrical Installer

airbus.com Logo

Airbus

Location Icon

Location:
United States , Mobile

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Electrical Installer to join our production team in Mobile, AL. The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you’ll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft.

Job Responsibility:

  • Responsible for completing electrical installations and connections which include Basic Aircraft installation, Cabin Installations, Cockpit and Cargo and Ground Test
  • Perform tests and inspections including but not limited to: the preparation and change of programs, checks system functions in compliance with work orders, inspects earth connections, performs continuity tests including ground test inspection, start of operation, trouble shooting, debugging, entering of measured values and documenting same in the SAP system
  • Installs and produces electrical components at the station as per order including collecting, reading, comparing and set-up
  • Prepares electrical components at the station or workplace according to work order including marking, preparing, laying, connecting, assembling, bundling, painting and soldering of parts, assemblies and sub-assemblies
  • Adapts, torques and secures electrical components including: equipment panels, printed circuit boards, sections and the documentation of works and queries (e.g. PIR Book, outstanding work folio items)
  • Responsible for the sequencing and performance of work and subsequent results
  • Perform other duties as assigned

Requirements:

  • High school diploma or equivalent form of education
  • Completion of a technology Certification of Training program from a post-secondary institution or a previous employer and documentation of same
  • The ability to successfully complete the following trainings provided by Airbus after recruitment: Health & Safety, General aircraft familiarization, Quality training
  • 2 years minimum experience in Aviation Production or equivalent required
  • Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions
  • Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals
  • Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification
  • Equipment Operation: Able to operate a wide range of personal and office electronic equipment. Working on jigs at fuselage at a height of 15 feet. Able to work on hydraulic lifts sometimes at a height of up to 40 feet
  • Carrying: able to occasionally carry up to 55lbs/25kg which engaging in training, addressing production issues or as part of continuous improvement projects
  • Lifting: able to occasionally lift up to 55lbs/25kg
  • Pushing/Pulling: able to push/pull items in office areas
  • Sitting: able to sit for extended periods of time at computer and in meetings
  • Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves
  • Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time
  • Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time
  • Standing: able to stand for extended periods of time delivering information
  • Travel: able to travel overseas and domestically sometimes for extended periods of time
  • Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces

Nice to have:

  • Degree as an electronic technician or 5 years of valuable experience on test benches
  • 5+ years hands-on experience in Aviation Production
What we offer:
  • Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP")
  • Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program
  • Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages
  • Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility

Additional Information:

Job Posted:
February 22, 2026

Expiration:
February 28, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Airbus - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Aircraft Electrical Installer

New

Electrical Systems Installation Expert

You will contribute to all electrical systems integration activities related to ...
Location
Location
France , Toulouse Area
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in aeronautical engineering or equivalent
  • 10 years of experience in a similar position (electrical system installation expertise)
  • Deep knowledge in aircraft electrical systems installation (practices, methods, technologies, …)
  • Ability to verify the compliance of a detailed design solution toward baseline of validated requirements
  • Capability to establish good communication and relationships with ATR’s suppliers and with internal stakeholders for daily business
  • Ability to work in a team and in a transverse fast-paced environment with changing priorities and requirements
  • Problem solving and goal oriented
  • Strong experience with Catia V5 for the creation & validation of 3D models
  • DMU understanding and navigation of Product Structure with clear understanding
  • Knowledge on Aircraft build process and basic understanding of Aircraft systems
Job Responsibility
Job Responsibility
  • Contribute to all electrical systems integration activities related to a TC change / development project / MOD implementation from the technical evaluation of the request/need up to the certification of the change
  • Ensure focal point for all matters related to the installation of electrical systems
  • Act as an expert on his/her domain by ensuring technological and normative watch, creating and approving rules and good practice, providing support to other actors
  • Contribute to update Technical Design Directives
  • Contribute to plan for development and for verification & validation of such solutions
  • Ensure continuity between the feasibility studies and development phases
  • Carry out the concept studies and tradeoff for Electrical System Installation
  • Contribute to issue of Certification Program and associated Means of Compliance
  • Guarantee that due consideration is given to state-of-the-art practices, certification and airworthiness rules, flight safety and sensible product liability policies
  • Support the preparation and development of drawing sets of conceived parts together with the designer, once design is frozen
What we offer
What we offer
  • Highly competitive compensation package (profit and success sharing, employee savings plan…)
  • Work-life balance (remote working, 6th week of paid leave, additional days off for family events…)
  • Well-being / health (supplementary health & welfare coverage…)
  • Career paths enabling employees to develop their skills and build a professional project
  • Wide choice of development programs for soft and hard skills
  • CSE: ATR (family and employee events) and Airbus CSE (travel, vacation camps …)
  • Fulltime
Read More
Arrow Right

Crew Chief

The Crew Chief (CC) position primarily functions as a mechanic on aircraft for a...
Location
Location
United States
Salary
Salary:
Not provided
aevex.com Logo
AEVEX Aerospace
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must possess an active DoD Secret Security Clearance, or higher
  • Must meet all DoD Contractor deployment requirements and pass Combat Readiness Course
  • Must have excellent verbal, written communication, and organizational skills
  • Must pass a pre-employment background check
  • Must have a High School Diploma/GED or equivalent
  • Must be a US citizen with a valid US passport
  • Must possess current FAA Class II Medical Certificate
  • Minimum 2-4 years of relative experience and knowledge of Aviation Maintenance
  • UAS Maintenance Experience (Group 2+) 2+ years
  • OCONUS deployment experience is a must
Job Responsibility
Job Responsibility
  • Execute all maintenance actions to support on-time delivery of service
  • Create flight schedules and track aircraft specific information
  • Interpret technical data from blueprints and engineering specifications
  • Conduct aircraft ground fueling and weight and balance
  • Manage and execute aircraft and engine maintenance
  • Ensure accurate documentation of aircraft maintenance records
  • Complete aircraft and engine maintenance as required
  • Follow established aviation safety procedures
  • Conduct scheduled inspections and complete follow-up
  • Inspect engines, landing gear, instruments, brakes, valves, and other aircraft systems
What we offer
What we offer
  • 401(k)-retirement plan
  • Comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of premiums paid by the company
  • Professional development funds
  • Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support
  • Fulltime
Read More
Arrow Right

Flight Test Instrumentation Electrical Design Lead

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
186240.00 - 232800.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. in Engineering
  • 7+ years experience as Electrical Design Engineer or Instrumentation Engineer
  • Experience with design and installation of wiring for flight
  • Experience with the routing of wires/harnesses for aircraft
  • Experience generating work instructions
  • Experience with design for manufacturing
  • Must be able to lift 30 lbs unassisted
Job Responsibility
Job Responsibility
  • Support the Design, Fabrication, Developmental Test, and Certification Efforts of Archer’s piloted eVTOL aircraft project
  • Perform the Electrical Installation Design for all Flight Test Instrumentation related hardware for flight test aircraft
  • Support the Installation planning and liaison manufacturing for the installation of flight test instrumentation onto test aircraft in buildup and in active test
  • Work with internal customers and vendors to solve instrumentation and measurement related challenges
  • Key advisor to the Instrumentation Director regarding all aircraft instrumentation electrical design activities
  • Develop processes and documentation to support the installation and maintenance of flight test instrumentation
  • Collaborate with the Flight Test Engineering and Certification Teams to plan and perform all required development and certification flight test activities
  • Collaborate with all engineering design and analysis teams to establish a comprehensive instrumentation plan including, but not limited to, monitoring of strain, temperature, vibration, pressure, airdata, ECS, etc
  • Assist in designing all hardware required for flight test. For example, instrumentation racks, air data booms, aircrew interfaces, workstations, camera systems, telemetry systems, etc
  • Support instrumentation technicians and Aircraft Operations Team in the implementation of instrumentation designs
  • Fulltime
Read More
Arrow Right

Avionics technician-ground test inspector

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the plan...
Location
Location
United States , Mobile Area, AL; Columbus, MS; Kinston, NC
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Vision: adequate to enter and read material on computer screens
  • Hearing: able to hear sufficiently to engage in conversation in office settings
  • Speaking: able to engage in conversations in person and via electronic means
  • Equipment Operation: Able to operate a wide range of personal and office electronic equipment
Job Responsibility
Job Responsibility
  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
What we offer
What we offer
  • competitive base salaries
  • incentive compensation
  • a retirement savings plan
  • comprehensive health and welfare coverage
  • Fulltime
Read More
Arrow Right

Low Voltage Power Engineer, Integration

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
134400.00 - 168000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Electrical Engineering or a related field
  • Experience with: 14 CFR Part 23 or 25 Certification programs
  • At least 10 years experience in Aircraft external lighting system development (ATA33)
  • Knowledge and experience on electrical power distribution system development (ATA 24)
  • Good communication skills, teamplayer, willing to proactively step in and help
Job Responsibility
Job Responsibility
  • Support trade studies related to external lighting system architecture
  • Contact and assess possible suppliers capabilities (technical, risks, quality, cost, weight)
  • Create, validate and verify equipment, subsystem and system levels requirements (ARP4754)
  • Create and review engineering deliverables required from development to certification (e.g.: drawings, ICDs, test plan, test procedures/reports, technical requirement documents, manuals)
  • Work closely with other systems/teams (e.g.: installation, maintainability, human factor, pilot) to define the interfaces
  • Lead the execution of tests to support the integration of the External Lighting System into External labs and Flight Test Facilities.
  • Provide support to safety activities (ARP4761 tasks - FHA, PSSA, CMA, FMEA, SSA)
  • Support Low voltage electrical system power distribution development
  • Available to travel
What we offer
What we offer
  • Reasonable accommodations for applicants with physical or mental disabilities, and those with sincerely held religious beliefs
  • Fulltime
Read More
Arrow Right

Avionics technician-ground test inspector

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the plan...
Location
Location
United States , Mobile Area, AL; Columbus, MS; Kinston, NC
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Physical Requirements: Vision: adequate to enter and read material on computer screens, Hearing: able to hear sufficiently to engage in conversation, Speaking: able to engage in conversations, Equipment Operation: Able to operate a wide range of personal and office electronic equipment, Working on jigs at the fuselage at a height of 15 feet, Able to work on hydraulic lifts sometimes at a height of up to 40 feet, Carrying: able to occasionally carry up to 20 lbs, Confined Space: able to enter and exit a 12" x 22" passage, Heights: able to work at heights of approximately 40 feet, Lifting: able to occasionally lift up to 30 lbs, Pushing/Pulling: able to push/pull items, Sitting: able to sit for extended periods of time, Squatting/Kneeling: able to occasionally squat or kneel
Job Responsibility
Job Responsibility
  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
What we offer
What we offer
  • Upon successful completion of the program and military separation, candidates may be considered for a permanent position
  • Full-time benefits include competitive base salaries, incentive compensation, a retirement savings plan, and comprehensive health and welfare coverage
  • Fulltime
Read More
Arrow Right
New

Avionics technician-ground test inspector

Avionics Technician-Ground Test Inspector (GTI) will be responsible for the plan...
Location
Location
United States , Mobile Area, AL; Columbus, MS; Kinston, NC
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/ GED
  • Ability to successfully complete trainings provided by Airbus
  • 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred)
  • 2 years minimum of experience in trouble shooting on aircraft systems
  • Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations
  • Keep tools and support equipment in safe operational conditions at all times
  • Vision: adequate to enter and read material on computer screens
  • Hearing: able to hear sufficiently to engage in conversation in office settings
  • Speaking: able to engage in conversations in person and via electronic means
  • Equipment Operation: Able to operate a wide range of personal and office electronic equipment
Job Responsibility
Job Responsibility
  • Perform Ground Tests
  • Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems
  • Perform function tests on all systems (flight controls, navigation, passenger entertainment, etc.)
  • Organize documentation of any non-conformity in the SAP NC system and initiate associated retests
  • Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments
  • Perform Troubleshooting (T/S)
  • Prepare and coordinate troubleshooting and distinguish error types
  • Clarify problems with the engineering department
  • Ensure the safety of people and the aircraft all along the process
  • Execute ground test following released documents and their associated work orders
What we offer
What we offer
  • Competitive base salaries
  • Incentive compensation
  • A retirement savings plan
  • Comprehensive health and welfare coverage
  • Fulltime
Read More
Arrow Right

Aircraft Electrician

Joining our team means you will be directly shaping the future of aviation. You’...
Location
Location
United Kingdom , Broughton
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
April 30, 2026
Flip Icon
Requirements
Requirements
  • Evidence of achievement of Level 3 time served qualification within an Electrical field, typically evidenced by a full Certificate of Modern Apprenticeship or an equivalent combination of NVQ Level 3 and a Level 3 Vocationally Related Academic Qualification
  • Proven experience as an Electrician in a production or manufacturing environment
  • Ability to accurately read and interpret aircraft technical specifications, diagrams, and quality control documentation
  • Thorough knowledge of and commitment to upholding Health & Safety regulations pertinent to the aircraft manufacturing trade
  • Ability to maintain stringent quality standards in a fast-paced environment while adhering to all Standard Operating Instructions (SOIs)
Job Responsibility
Job Responsibility
  • Perform electrical system installation and continuity testing across the A320 wing assemblies
  • Install and route critical electrical harnesses to support key system enablement
  • Integrate specific electrical equipment required for the aircraft’s fly-by-wire design
  • Support mechanical teams during the installation of associated fuel and hydraulic systems
What we offer
What we offer
  • Competitive salary
  • Annual profit share
  • Contributory pension
  • Share options
  • Car leasing scheme
  • Free onsite parking
  • Shopping discounts
  • 35 hour week
  • Wellbeing benefits (including 24/7 online GP and mental health support)
  • Discounted family health / dental insurance / eye tests
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy