Aerospace Quality Technician Job at PPG Industries (Grand Prairie)

Electrical Lab Technician

As an Electrical Lab Technician at Magdrive, you will be the bridge between prot...

Location

United Kingdom , Harwell Campus, Oxfordshire

Salary:

40000.00 - 50000.00 GBP / Year

Magdrive

Expiration Date

Until further notice

Requirements

5+ years of experience in a similar role within a manufacturing/engineering environment
Knowledge of ESD and lab safety practices
Proficiency with test equipment such as oscilloscopes, DAQ, power supplies etc
Familiarity with PCB design software and ability to interpret circuit diagrams/layouts
Electrical wiring and harness assembly experience (soldering/crimping)
Fine-pitch soldering and component-level rework skills (ESA-certified soldering a plus – training can be provided)
Dedicated to high quality standards with strong attention to detail

Job Responsibility

Carrying out electrical wiring and harness assembly for lab and thruster systems
Running electrical tests (including automated testing), collecting and reporting data
Performing soldering, fine-pitch component rework, and repair of prototype/production boards
Maintaining the lab environment, ensuring it is well equipped, tidy, and safe
Procuring, maintaining, calibrating, and organising lab equipment and tools
Ensuring compliance with lab rules, ESD safety, and general health & safety procedures
Documenting results, test procedures, and observations for traceability

What we offer

25 days annual leave + bank holidays, plus long-service awards (up to 30 days)
Private medical insurance
Flexible working hours
Remote working where possible
Financial support for home office setup

Fulltime

Composite Technician

You will be responsible for carrying out composite repair and manufacturing work...

Location

United Kingdom , Manchester

Salary:

40000.00 - 46865.00 GBP / Year

Chevron Recruitment Agency

Expiration Date

Until further notice

Requirements

Desired 2 years experience in composite repair and manufacturing within the aviation/aerospace industry
Understanding of EASA/CAA regulations and composite repair standards
Proficient in working with a range of composite materials including carbon fibre, glass fibre, and aramid
Familiarity with technical drawings, manuals, and repair documentation
A strong eye for detail, manual dexterity, and quality-first approach

Job Responsibility

Carry out composite repair and manufacturing work on a variety of aircraft components and structures under Part 145 approval
Liaise with Planning to develop the repair techniques and methods from OEM Tech Data
Ensure all work is completed IAW procedures, regulations and health and safety requirements
Ensure all documentation is correctly completed and all planned tasks are carried out accurately and in order
Other tasks as required by Senior Management

Fulltime

Quality Engineer Manager, Aerospace

The Aerospace Quality Engineer Manager support the QA activities of the Huntsvil...

Location

United States of America , Huntsville

Salary:

Not provided

PPG Industries

Expiration Date

Until further notice

Requirements

Bachelor's degree in quality (preferred), Engineering, Production/Operations Management, or a related field OR a total of nine (9) or more total years of hands-on QA experience may substitute for the college degree required
At least five (5) years' experience working in a Quality function within an Aerospace or other regulated industry required
At least one (1) years' experience as a supervisor, team lead, or other leadership role within a Quality or laboratory environment with management responsibilities for all employees required
Prior experience with Quality management systems required
Certified Quality Engineer (CQE) or Certified Quality Auditor (CQA)
Only U.S. Citizens, Green Card holders, and political asylees or refugees are eligible to apply

Job Responsibility

Directly Manage a team of QC Technicians and Quality Engineers at the Huntsville plant, providing guidance on production expectations, coaching for success, and training team members in quality analysis tools and methods
Develop and implement proactive quality methodologies to transform us from reactionary to proactive, promoting continuous improvement activities aimed at reducing costs and meeting customer and our goals
Ensure the team meets audit, production, and PPG standards and procedures, maintaining companywide compliance with quality systems, including ISO9001 and AS9100 certifications, and oversees document control following these standards
Assist the Plant Quality Manager with root cause analysis of failed products, documents results, compile records, and support other quality-related investigations
Lead the implementation of quality systems in the aerospace manufacturing environment, serving as a leader in Failure Modes and Effects Analysis (FMEA) and quality control plans, including implementing and tracking Process FMEAs
Investigate detailed production control issues related to processes, methods, standards, specifications, inspection, and testing equipment, and facilitates team member process improvement suggestions using problem-solving methods
Coordinate activities for the Non-Conformance Reporting System, Material Review Board, and Purchase Order (PO) contract review, while generating quality metrics to support departmental goals

Fulltime

Electrical Technician

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

90000.00 - 115000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

2-3 years of experience as an electrical technician in aviation, aerospace or similar industry
Technical skills and expertise in avionics and aircraft subsystems operation and troubleshooting
Hands on experience cutting, splicing and crimping wires to fabricate a wide variety of harnesses types
Extreme attention to detail and high expectations for quality technical work
Ability to replace various subsystems components
A safety conscious mindset for ensuring the wellbeing of all working in the labs

Job Responsibility

Help build aircraft subsystems integration test labs
Read wiring diagrams, schematics, and have the ability to understand common electrical symbols and components
Repair and replace aircraft subsystem components in a lab environment
Maintain lab documentation for lab modifications, repairs and upgrades
Inspect the work of other technicians to ensure quality and conformity with design specifications
Assist in troubleshooting subsystems integration issues
Fabricate and ring-out wiring harnesses for testing / debugging purposes
Follow proper working techniques for cleanliness, reliability and quality

What we offer

Reasonable accommodations for applicants with physical or mental disabilities, and those with sincerely held religious beliefs

Fulltime

Aerospace Source Inspector

The Source Inspector, (SI) is responsible for performing inspection operations o...

Location

United States , Carson City

Salary:

Not provided

TRIGO Global Quality Solutions

Expiration Date

Until further notice

Requirements

Experienced quality individual in dimensional and visual inspection of aerospace machined components
Experience in performing FAI’s – AS9102
Experience with hand measurement tools
Knowledge of CMM Inspection process
Knowledge and experience in GD&T (ASME Y14.5)
Knowledge and experience with blueprint interpretation
Perform final inspection and receiving inspection
MS Outlook, and EXCEL experience
Mechanical inspection experience
IPC, J-STD, and Mil-Spec inspection experience

Job Responsibility

Performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection
Reviewing all paperwork relating to the product
Operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly
Verifying FAI’s to AS9102 for accuracy and completeness
Traveling to end customer’s suppliers’ locations

What we offer

12 days paid vacation first year, increasing with service years
10 days paid sick time
11 paid holidays
Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents
Champ Plan Wellness and Health
Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings
Participation increases net take home pay $$$ in most instances
Free wellness initiatives
Free tele-health
Free and discounted RX

Fulltime

Senior Quality Control Engineer

This role is responsible for ensuring the effectiveness and efficiency of ICEYE’...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering, preferably in Mechanical or Mechatronics Engineering, or equivalent practical experience in a production or quality-focused environment
Minimum 7 years of experience in a Quality Control or Quality Engineering role within aerospace, defense, or high-reliability manufacturing environments, with proven responsibility for inspection strategy, process improvement, and technician supervision
Strong understanding of inspection methods, measurement systems, and quality standards (e.g., IPC, ISO 9001, AS9100)
Skilled in interpreting engineering drawings, Geometric Dimensioning and Tolerancing, and manufacturing documentation
Proficient in quality data analysis, root-cause investigation, and use of ERP/MES systems
Experience preparing quality documentation and reports
Demonstrated leadership and mentoring abilities (Influencing QC technicians), with a proactive and hands-on approach to problem-solving. Strong sense of ownership, attention to detail, and collaboration across multidisciplinary teams
Familiarity with continuous improvement methodologies (e.g., Lean, Six Sigma)
Fluency in English (written and verbal)

Job Responsibility

Lead and oversee day-to-day quality control operations, providing guidance, mentorship, and technical direction to QC technicians
Define and continuously refine inspection strategies, focusing on efficiency, risk-based prioritization, and avoidance of under-inspection and over-inspection
Develop and maintain inspection plans, checklists, and quality documentation in close coordination with Design and Process Engineering
Monitor and analyze QC performance metrics (e.g., inspection yield, non-conformance trends, time to close deviations)
Drive continuous improvement initiatives within QC operations by identifying recurring issues, inefficiencies, and training needs
Collaborate closely with Design Engineering and Process Engineering to ensure manufacturability and inspectability are considered early in the product lifecycle
Support broader Mission Assurance & Reliability activities such as audits, root-cause analyses, and process qualification reviews
Champion a culture of quality awareness and accountability within production teams

What we offer

Occupational healthcare, occupational, and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus

Fulltime

Quality Aerospace Technician

For almost 30 years, SQA Services has been a premier leader in the provision of ...

Location

United States , New Orleans

Salary:

29.00 - 31.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
1+ years of experience working in a production, mechanical, or manufacturing environment
Must be willing to work Monday to Friday: 6AM - 2:30PM
Must be able to work extended hours and weekends as needed
Must be able to lift at least 25 lbs unassisted
Must be able to stand for extended periods – 8 hours min
Must be able to stoop, twist, and bend
Must be willing to work in a cleanroom environment, which requires PPE
Must pass a comprehensive 7-year background check

Job Responsibility

Ensure the safety of daily operations by maintaining a high attention to detail
Collaborate and cooperate with team members to achieve daily, weekly, and monthly targets
Maintain a professional and neat work area
Perform work according to procedures, specifications and work instructions
Record daily work completion accurately to report to the lead technician
Use various mechanical tools without instruction
Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment
Operate high-pressure purge work bench
Perform packaging

Fulltime

Technician Sr, Quality Assurance

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Requires a post-secondary degree, diploma or certificate in Quality, Aeronautical, Mechanical, Industrial or Manufacturing Engineering
Minimum of three (3) years’ experience as a Code 1006 Quality Assurance Technician Jr or equivalent
In-depth knowledge of aerospace manufacturing, industry standards, practices and specifications
Must be a sight-reader of drawings
Must be cognizant of AS9100 and ISO9001 standards
Must be familiar with Engineering, Methods, Work and Material Planning and how they relate to Quality activities
Must possess a strong working knowledge of computer applications including word processing and databases
Able to work in a team environment and must possess team facilitation skills
Requires good organizational skills and the ability to set and prioritize tasks and the ability to work independently

Job Responsibility

Technicians conduct analysis, trend identification and root cause, of non-conformances such as QIR, CAB, and RNCs
Recognizes the need for and initiates corrective and preventive action(s) for product or process discrepancies
Reviews production documentation for compliance and adequacy of inspection call outs and as necessary, develops required inspection criteria for the production of quality products
May review engineering drawings and specifications to ensure that all necessary Quality requirements have been included and may recommend changes to Quality or Engineering Management
Reviews production standards and Functional Test Procedures for correct inclusion of Quality System requirements
May act as an Authorized Quality representative on the Material Review Board (MRB)
Write NOE to support product integrity coordinators for Toronto site
Actions Quality Investigation Reports (QIR) and provides response of corrective and preventive action(s), taking input from inter-site and Supplier Compliance and report(s) to field services, as required. Initiates containment or documentations as required including RFQS. Ensure QIR records are maintained and accessible to everyone
Inter-site and finishing centres CAB (Corrective Action Board) containment and closure
of issues that are assigned Toronto responsibility

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Aerospace Quality Technician

PPG Industries

Location:
United States of America , Grand Prairie

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
April 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Aerospace Quality Technician

Electrical Lab Technician

Composite Technician

Quality Engineer Manager, Aerospace

Electrical Technician

Aerospace Source Inspector

Senior Quality Control Engineer

Quality Aerospace Technician

Technician Sr, Quality Assurance

Aerospace Quality Technician

PPG Industries

Location:United States of America , Grand Prairie

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:April 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Aerospace Quality Technician

Electrical Lab Technician

Composite Technician

Quality Engineer Manager, Aerospace

Electrical Technician

Aerospace Source Inspector

Senior Quality Control Engineer

Quality Aerospace Technician

Technician Sr, Quality Assurance

Location:
United States of America , Grand Prairie

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
April 23, 2026