Aerodynamics Engineer Job at Hermeus (Los Angeles)

Sr. Aerodynamics Engineer, Modeling and Simulation

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

150000.00 - 190000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS / MS / PhD in Aerospace Engineering or a related field
4+ years of experience with BS, or 3+ years of experience with MS, or 1+ years of experience with PhD modeling rotorcraft, tiltrotor, eVTOL aerodynamics at full-vehicle level
Strong understanding of fundamentals of fixed-wing and rotorcraft aerodynamics, performance, stability & control
Experience in eVTOL and/or multicopter vehicle aerodynamics design and analysis, including 6 DoF vehicle trimming and trajectory optimization
Experience with gradient-based and gradient-free optimization techniques
Experience with surrogate modeling techniques (like Kriging methods) and statistical analysis
Experience with experimental data processing and reduction techniques
Proficiency in Python programming
Experience with software development, object-oriented, version control best practices, as well as Git, CICD, Conda
Excellent work planning and issue resolution skills

Job Responsibility

Perform low/mid/high fidelity aerodynamic simulations of Archer eVTOL aircraft
Develop linear/non-linear aerodynamic models to predict aircraft behavior and performance throughout the flight envelope
Analyze experimental data (either from flight test or wind tunnel) to identify sources of model errors, validate, and improve aerodynamic models of the vehicle
Develop efficient methods to feed flight test data back into aerodynamic simulation models of various fidelity and complexity
Contribute to the development of Archer aerodynamic software stack, improving methods and workflows
Coordinate with other cross-functional teams and pilots for flight simulator aerodynamic modeling updates and issue resolution

Fulltime

Senior Aerodynamics Modeling and Optimization Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

Not provided

Archer Aviation

Expiration Date

Until further notice

Requirements

BS / MS / PhD in Aerospace Engineering or a related field
4+ years of experience with BS, or 3+ years of experience with MS, or 1+ years of experience with PhD modeling rotorcraft, tiltrotor, eVTOL aerodynamics at full-vehicle level
Strong understanding of fundamentals of fixed-wing and rotorcraft aerodynamics, performance, stability & control
Experience in eVTOL and/or multicopter vehicle aerodynamics design and analysis, including 6 DoF vehicle trimming and trajectory optimization
Experience with gradient-based and gradient-free optimization techniques
Experience with surrogate modeling techniques (like Kriging methods) and statistical analysis
Experience with experimental data processing and reduction techniques
Proficiency in Python programming
Experience with software development, object-oriented, version control best practices, as well as Git, CICD, Conda
Excellent work planning and issue resolution skills

Job Responsibility

Perform low/mid/high fidelity aerodynamic simulations of Archer eVTOL aircraft
Develop linear/non-linear aerodynamic models to predict aircraft behavior and performance throughout the flight envelope
Analyze experimental data (either from flight test or wind tunnel) to identify sources of model errors, validate, and improve aerodynamic models of the vehicle
Develop efficient methods to feed flight test data back into aerodynamic simulation models of various fidelity and complexity
Contribute to the development of Archer aerodynamic software stack, improving methods and workflows
Coordinate with other cross-functional teams and pilots for flight simulator aerodynamic modeling updates and issue resolution

Fulltime

Senior Aerodynamics Engineer

At REGENT, we’re on a mission to revolutionize regional transportation between c...

Location

United States , North Kingstown

Salary:

Not provided

REGENT Craft

Expiration Date

Until further notice

Requirements

Expertise in aerodynamic design, analysis, and testing for aircraft or advanced mobility systems
Track record owning at least one complex aerodynamic design from concept through CFD and test validation
Experienced in Aerospace, Mechanical, or related engineering field
Expert-level CFD and meshing skills on HPC (Star-CCM+, ANSYS Fluent, Flow360, Numeca
ANSA, Pointwise, or similar) and proficiency with CAD-integrated workflows (Rhino, NX, SolidWorks, Catia)
Deep understanding of unsteady and near-surface flows (blown wings, separation, ground effect, fluid–structure interaction) and how to turn results into actionable performance data
Strong communication and mentorship skills, with the ability to guide junior engineers and align with structures, controls, propulsion, and certification

Job Responsibility

Own aerodynamic design and analysis across sizing, detailed design, and validation for Viceroy
Build, automate, and maintain CFD workflows (e.g., Star-CCM+, ANSYS Fluent, Flow360, Numeca) integrated with CAD and geometry parameterization
Analyze complex phenomena such as blown lift systems, flow separation, fluid–structure interaction, and ground effect in low-altitude, near-surface regimes
Plan and interpret wind tunnel, on-water, and flight tests
translate CFD and test data into performance models, lookup tables, and inputs for controls and structures
Document best practices, coach junior engineers in CFD and aero design, and present trade studies and recommendations to cross-functional and non-technical stakeholders

What we offer

Competitive compensation including a robust equity incentive plan
Comprehensive health, dental, and vision insurance - we cover 100% of your premiums
401(k) with company matching
Generous flexible time off, paid parental leave, and company-wide holiday breaks
Relocation packages available
Daily, free catered lunches
Learning & professional development opportunities

Fulltime

Senior Engineer Aerodynamic

At Nordex, rotor blade aerodynamic design is a key differentiator in our wind tu...

Location

Germany , Hamburg

Salary:

Not provided

Nordex Group

Expiration Date

Until further notice

Requirements

Master's degree in Mechanical or Aeronautical Engineering, or a closely related field
a PhD is a strong advantage, particularly with specialization in aerodynamics
Minimum of 5-8 years of professional experience in aerodynamic design or related engineering fields, ideally within the wind energy sector or similar industries involving complex fluid dynamics applications
Strong organizational mindset with demonstrated ability to manage complex engineering projects from concept to execution
Proficient in engineering programming, with hands-on experience in languages such as Python, C/C++, and MATLAB, applied to simulation, data analysis, and tool development
Fluency in English is required

Job Responsibility

Independently plan, structure, and execute technically complex aerodynamic design projects, including the development of new rotor blades and the detailed analysis of legacy designs
Applying advanced fluid dynamics principles, leveraging high-fidelity simulation tools, and integrating multidisciplinary constraints to achieve optimal aerodynamic performance
Development and continues improvement of prediction methods and industrialization of research approaches and methods
Aerodynamic design, evaluation and optimization of wind turbine rotor blades
Prepare and present technical results in engineering review meetings and communicate key findings, risks, and recommendations to senior management and other decision‑making stakeholders
Automation of methods within the framework of in-house design tools
Validation of results and method tuning using measurement data

What we offer

Flexible working hours
Various working time models
Up to 8 days of mobile work per month
80% subsidy for the public transportation ticket (Deutschlandticket)
€15 employer contribution for bike leasing
Company pension scheme
Option of occupational disability insurance
Health days
Company sports activities
Office yoga

New

Aerodynamic UAV Simulation Engineer

Location

Germany , Munich

Salary:

Not provided

Helsing

Expiration Date

Until further notice

Requirements

Have analysed and characterised aerodynamic performance of UAVs or light aerospace systems using both low-fidelity tools such as OpenVSP/VSPAERO, XFLR5/XFOIL and AVL, and commercial CFD packages such as ANSYS Fluent, StarCCM+ or OpenFOAM
Have planned and executed physical validation test campaigns, including sensor instrumentation setup and post-test data correlation, bridging simulation outputs and measured results into improved solver accuracy
Apply a strong working understanding of subsonic flight mechanics, boundary layer physics, wing design and rotorcraft-induced flow fields to inform practical design decisions
Write scripting workflows in Python or MATLAB that automate simulation processing, geometric parametrisation and data visualisation across complex aerodynamic analyses
Act decisively with minimal guidance, own outcomes end-to-end and initiate solutions without waiting for direction

Job Responsibility

Build, calibrate and run low-fidelity aerodynamic models using Panel Methods, Vortex Lattice Methods and 2D boundary layer tools to rapidly evaluate early-stage concept designs, while executing high-fidelity 3D CFD simulations to resolve complex flow behaviours including rotor-wing interactions and fuselage drag
Generate, maintain and deliver comprehensive aerodynamic databases to Flight Dynamics, Control Law and Simulation teams, ensuring data quality and traceability meet programme requirements at each design milestone
Define and plan physical test setups, including wind tunnel campaigns, ground benches and flight test manoeuvres, executing validation tests in close collaboration with the Test Department and correlating sensor data back to simulation models to improve solver accuracy
Participate in airframe design reviews, providing quantitative aerodynamic feedback and guidance to Mechanical and Systems Engineering teams that directly informs structural and configuration trade-off decisions
Contribute to the automation of the simulation pipeline by scripting CAD-to-solver workflows in Python or MATLAB, reducing manual effort and accelerating design iteration cycles

What we offer

Competitive salary and VSOP options
Relocation support: up to €2,500 and 4 weeks temporary accommodation
Learning: €500/£450 yearly allowance
Health & wellness: gym membership and mental health support (Nilo.health)
Social: regular company events and monthly social allowances
Enhanced parental leave: 22 weeks fully paid for primary caregivers & 6 weeks for secondary caregivers
Family support: 5 days of paid family emergency leave, 100% remote work option during pregnancy and phased return to work
A hands-on onboarding program ('Infraduction')

Fulltime

New

Lecturer in Aerospace Aerodynamics

The role-holder will drive forward research and teaching in aerospace aerodynami...

Location

United Kingdom , Manchester

Salary:

47389.00 - 58225.00 GBP / Year

The University of Manchester

Expiration Date

June 29, 2026

Requirements

Notable experience in computational aerodynamics
Demonstrable experience relevant to aerospace design, aerospace flight physics, virtual environments for aerospace applications, or another overtly aerospace application area
Lead on the development and delivery of teaching of fundamental topics related to Aerospace Engineering

Job Responsibility

Drive forward research and teaching in aerospace aerodynamics
Focus on compressible flows including aero-thermal dynamics, transonic, supersonic and hypersonic flows and rarefied gas dynamics
Work collaboratively across the University’s established strengths in aerospace and engineering design
Cultivate partnerships with the aircraft industry and international research groups
Lead on the development and delivery of teaching of fundamental topics related to Aerospace Engineering

What we offer

Generous employer contribution pension
29 days annual leave plus bank holidays, along with Christmas closure
Ride to work and EV car scheme available

Fulltime

Aerospace Engineer (Store Separation)

This position will focus on the evaluation of aircraft compatibility pertaining ...

Location

United States , Niceville

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship
Bachelor's degree in Aeronautical, Aerospace, or Mechanical Engineering (with Aerospace specialty)
Ability to obtain a Secret security clearance within 6-9 months
Knowledge of aerodynamics and fluid mechanics
Experience in modern control theory applications
Experience operating in LINUX/UNIX environments using scripting languages (python, PERL, etc.)
Experience using MatLab or similar engineering software
Excellent technical writing and oral communication skills
Excellent attention to detail
Strong analytical and organizational skills

Job Responsibility

Evaluate aircraft compatibility pertaining to internal and external stores
Support the aircraft/store certification process
Perform sophisticated store separation aerodynamic analytical efforts
Design/direct ground tests, wind tunnel tests, and flight tests
Apply modeling and simulation tools to address complex aerodynamic configurations
Devise engineering software scripts and programs for specific program engineering purposes
Professionally document certification artifacts, engineering documentation, and formal presentations
Work well as a member of a discipline team in a dynamic multi-tasking environment

Fulltime

Senior Product Design Engineer - Aero Specialist

Skydio’s mechanical systems are the backbone of reliable autonomous flight. An i...

Location

United States , San Mateo, California

Salary:

140000.00 - 225000.00 USD / Year

Skydio

Expiration Date

Until further notice

Requirements

5+ years of prior product development experience with a proven track record of execution, enthusiasm, and collaboration
Experience using reduced order aircraft performance and control modeling such as vortex lattice or lifting line methods (e.g. AVL, VSPAERO) to quickly iterate on conceptual designs
Experience performing end-to-end CFD analyses using Navier–Stokes–based solvers (e.g., ANSYS Fluent, STAR-CCM+, OpenFOAM, Cart3D, Chimera, FUN3D, or OVERFLOW), including mesh generation, solver setup, and post-processing with visualization tools
Skilled in data visualization and analysis of CFD, wind tunnel, and/or flight test data using Python, Tecplot, ParaView, or similar tools to effectively communicate aerodynamic performance and key design insights
Proficiency with aerodynamic modeling tools, such as panel methods, vortex lattice, lifting line, or particle-based approaches, for aerodynamic analysis and conceptual design
Hands-on experience with wind tunnel testing, including model design, test planning and execution, instrumentation setup, data acquisition, reduction, and analysis of discrepancies
Bachelor's degree or higher in aerospace or mechanical engineering or equivalent with demonstrated academic excellence
Ability to apply analytical problem solving skills and engineering fundamentals to create high-quality designs for a sophisticated vehicle system
A strategic mind across the full design, source, build, validate, and ship process. Proven ability to make considered decisions at various stages

Job Responsibility

Play a key role in the design of Skydio aircraft by performing aerodynamic analysis and simulation and designing/executing experiments, and doing concept and detailed design of systems and components with key aerodynamic considerations
Build and analyze aerodynamic models to determine flight envelopes and predict vehicle dynamics
Design/run experiments, review flight test logs, and examine data to validate simulations and refine the aerodynamic models and performance of our aircrafts
Collaborate closely with cross functional teams (structures, controls, hardware engineering) to guide design and integration decisions
Partner with the Flight Test Team in the development of test plans and post-flight data analysis
Collaborate with thermal engineers to design and refine integrated thermal solutions for vehicle systems
Execute low/mid/high-fidelity CFD analyses to assess aerodynamic and mechanical design characteristics and predict aircraft performance and stability
Have ownership over the aerodynamic design of our aircrafts and key accessories from the ground-up
Collaborate closely with mechanical and propulsion engineers to shape and integrate optimizations into new and existing architecture

What we offer

Equity in the form of stock options
Comprehensive benefits packages
Relocation assistance may also be provided for eligible roles
Group health insurance plans
Paid vacation time
Sick leave
Holiday pay
401K savings plan

Fulltime

Select Country

Aerodynamics Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?