Advanced Technician - Metrology Job at Manufacturing Technology Centre (Coventry)

PMEL Technician

The PMEL Technician applies comprehensive metrology principles to all measuremen...

Location

United States , Vanderberg SFB

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent required
Minimum of four (4) years of verifiable positive PMEL or calibration technical experience required
Must satisfy background check criteria and be able to obtain a security clearance
Must be able to provide documentation of equipment and area discipline qualifications
Must be able to provide documentation of a proven excellent quality record as a calibration technician
Experience to include inspecting, troubleshooting, repairing, overhauling, aligning, calibrating, and certifying TMDE, and metrology laboratory working standards required

Job Responsibility

Complete assignments of troubleshooting, aligning, repairing, modifying, calibrating, and certifying TMDE in accordance with requirements of the PWS, TO 00-20-14, AFI 21-113, AFI 21-101 and other applicable directives as assign by PMEL Managers or PMEL Lead Technician
Provide advanced calibration and repair services on electronic, electro-mechanical, physical, dimensional, mechanical, and optical Test Measurement and Diagnostic Equipment (TMDE) in the assigned Precision Measurement Engineering Laboratory (PMEL)
Provide advanced calibration and repair services on specialized 68-degree room Test Measurement and Diagnostic Equipment (TMDE), fiber optic, sound, vibration, illuminance, noise, flow, primary pressure, and Air Force Note Coded TMDE
Captures test readings using common instruments such as oscilloscopes, digital multi-meters, pulse generators, power meters, torque calibrator, temperature, and pressure measurement devices
Utilize TMDE to troubleshoot and repair systems and circuit boards to component level, to include surface-mount technology
Perform daily operations in accordance with established safety and security practices
Perform daily work assignments to ensure QMS goals are met or exceeded
Participates in root cause analysis process and corrective action determination meetings as required
Provide technical guidance and training to other technicians, when required
Interfaces with customers to report and resolve calibration/maintenance issues and limitations

Fulltime

PMEL Technician

The PMEL Technician applies comprehensive metrology principles to all measuremen...

Location

United States , Vanderberg SFB

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent required
Minimum of four (4) years of verifiable positive PMEL or calibration technical experience required
Must satisfy background check criteria and be able to obtain a security clearance
Must be able to provide documentation of equipment and area discipline qualifications
Must be able to provide documentation of a proven excellent quality record as a calibration technician
Experience to include inspecting, troubleshooting, repairing, overhauling, aligning, calibrating, and certifying TMDE, and metrology laboratory working standards required

Job Responsibility

Complete assignments of troubleshooting, aligning, repairing, modifying, calibrating, and certifying TMDE in accordance with requirements of the PWS, TO 00-20-14, AFI 21-113, AFI 21-101 and other applicable directives as assign by PMEL Managers or PMEL Lead Technician
Provide advanced calibration and repair services on electronic, electro-mechanical, physical, dimensional, mechanical, and optical Test Measurement and Diagnostic Equipment (TMDE) in the assigned Precision Measurement Engineering Laboratory (PMEL)
Provide advanced calibration and repair services on specialized 68-degree room Test Measurement and Diagnostic Equipment (TMDE), fiber optic, sound, vibration, illuminance, noise, flow, primary pressure, and Air Force Note Coded TMDE
Captures test readings using common instruments such as oscilloscopes, digital multi-meters, pulse generators, power meters, torque calibrator, temperature, and pressure measurement devices
Utilize TMDE to troubleshoot and repair systems and circuit boards to component level, to include surface-mount technology
Perform daily operations in accordance with established safety and security practices
Perform daily work assignments to ensure QMS goals are met or exceeded
Participates in root cause analysis process and corrective action determination meetings as required
Provide technical guidance and training to other technicians, when required
Interfaces with customers to report and resolve calibration/maintenance issues and limitations

Parttime

Tooling Technician

We are seeking a Tooling Technician to serve as a cornerstone of our fabrication...

Location

United States , Los Angeles

Salary:

Not provided

Hadrian Automation

Expiration Date

Until further notice

Requirements

High school diploma or GED required
Minimum 10 years of experience in precision mechanical construction
Minimum 10 years of experience with model-based metrology tools (e.g., laser trackers, articulated arms, or coordinate measuring machines)
Proficiency in geometric dimensioning and tolerancing (GD&T), engineering reference systems, and complex blueprint interpretation
Demonstrated hands-on expertise with bench inspection tools and advanced metrology equipment

Job Responsibility

Fabricate and assemble complex tooling (e.g., jigs, fixtures, tool masters, gauges) with precision, using advanced reference systems
Design and develop custom holding devices, fixtures, and tooling interfaces to improve manufacturability and efficiency
Set up and utilize optical instruments and model-based metrology tools for inspection and alignment
Interpret and work from detailed engineering drawings, CAD models, and specifications to perform high-precision setups
Identify and recommend continuous improvements to tooling processes, documentation, and equipment utilization

What we offer

Medical, dental, vision, and life insurance plans for employees
401k
Relocation support may be provided for certain situations, based on business need
Flexible vacation policy

Fulltime

Senior Manager, Engineering, Maintenance & Facilities

The senior manager is accountable for all aspects of Engineering, Instrumentatio...

Location

United States , Madison

Salary:

Not provided

PCI Pharma Services

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline preferred
Master’s degree in engineering or business administration preferred
Operational background in cGMP environment, preferably in aseptic manufacturing/engineering
Demonstrated skill in managing a diverse population of professional, technical, and hourly personnel as well as external resources
Experience in working with regulators during inspections/audits is highly desired
8+ years of experience in the field of technical engineering support to biopharma/pharm and/or medical device facilities
8-10 years of experience in management of professional and technical staff with accountability for objectives and subsequent evaluation
5-8 years of experience with engineering and maintenance support to biopharma/pharm and/or medical device facilities
5 years of experience managing subordinate people leaders with accountability for objectives and subsequent evaluation
Experience with company financial systems and an understanding of accounting practices and financials a plus

Job Responsibility

Accountable for all aspects of Engineering, Instrumentation and Controls, Metrology, Utilities, Facilities, and Maintenance in supporting pharmaceutical product manufacturing across the PCI Madison, WI site
Provides leadership to ensure the highest level of quality and adherence to cGMPs across the site
Responsible for managing people, providing quality and technical direction, and actively participating in driving and developing strategies for continuous improvement within the department
Manages and oversees all areas of process engineering, automation, calibration, facilities, operation of utilities including HVAC, buildings and ground maintenance, and maintenance of utilities and facilities supporting aseptic operations
Responsible for management of site CAPEX projects and acts as site representative for PCI’s Environmental, Social, and Governance program
Ensures all aspects of engineering and facilities are adhering to cGMPS and PCI’s established SOPs
Ensures all projects are executed safely, on time, and within budget
Identifies, prepares and leads site CAPEX projects
Determine appropriate equipment, line, tooling, costs and capacities for new projects or changes to existing projects
Instill a strong culture of Lean and Continuous Improvement through the use of the site maturity index

Fulltime

Production Technician I

The technician will be responsible for assembling, operating, and monitoring sta...

Location

United States , Melrose Park

Salary:

24.00 USD / Hour

HonorVet Technologies

Expiration Date

Until further notice

Requirements

Have a minimum of a High School Diploma, GED, or equivalent education with one year of experience in a relevant work environment
Able to work 12hr shifts on a 2-2-3 schedule
Able to stand on concrete floors for an extended period of time
Able to lift up to 35 pounds by bending and lifting
Able to move heavy equipment and components as needed
Able to work with hazardous materials including antineoplastic products and raw materials that could lead to serious illness/injury
Able to wear required personal protective equipment (eye protection, safety shoes, gown, gloves)
Must be able to understand, speak, and write English in order to comply with necessary SOPs, SPECs, Job-specific training materials, GMPs, and other manuals

Job Responsibility

Assembling, operating, and monitoring state-of-the-art, aseptic equipment following applicable Standard Operating Procedures and current Good Manufacturing Practices
Practice good aseptic techniques to minimize the potential for product contamination
Understand advanced computerized systems through HMI
Ability to operate advanced HMI applications
Perform basic level machine operation, set-up and troubleshooting of all state-of-the-art equipment in their area
Load Parts Washer, Component Sterilizer, Vial Washer, Filling Machine and Capping Machine with raw materials and format parts
Maintains a down qualification if required by their area
Perform microbiological monitoring within the Filling Machine, ALUS, and Capping Machine
Assist other departments including MQA, Maintenance, Metrology, Engineering, Validation, Tech Transfer and Microbiology, with tasks on the equipment in their area General
Clean and sanitize equipment and Production areas per SOP

Fulltime

Sr R&D Engineer

Position: Sr R&D Engineer for a Medical Devices Company. Duration: 12+ Months Co...

Location

United States , Salt Lake City

Salary:

40.00 - 45.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

BS or MS degree in Engineering (Mechanical Engineering, Materials Science & Engineering, Biomedical Engineering or a closely related engineering degree required)
Minimum of 3 years of engineering experience or equivalent is required with a strong preference for least 2 year product development and design experience in medical devices / products
Medical device design and development experience related to high-volume manufacturing is strongly preferred
Experience with contact and non-contact metrology
Experience with manufacturing process validation including strategy development, First Article Inspection, Factory Acceptance Testing, and IQ/OQ/PQ’s
Knowledge of disciplined product development processes, regulatory and quality requirements such as 21CFR820.30
Strong design control experience
Developed understanding of DOE and statistical methods
Understanding of failure theory and modes for plastics, elastomers, and metals due to static and time-variable loading conditions

Job Responsibility

Drive design and development of product systems, subsystem and components by understanding design space with design options and tradeoffs, managing critical parameters, using design for manufacture principles as well as geometric dimensioning and tolerancing tools
Integrate product systems and subsystems to meet business objectives by addressing customer needs and product requirements under defined cost targets
Identify the best tools and approaches to effectively solve engineering problems to develop/optimize designs by leveraging appropriate mix of first principles / analytical, computational and experimental methods
Ensure implementation and rigor of product development processes and design control procedures
Support current products in terms of quality, manufacturing, supply continuity and cost improvement
Support execution of technical and/or cross-functional project work
Analyze design solutions using engineering first principles and advanced engineering methods such as FEA
Write detailed technical reports based on design verification analysis/testing for design changes and product design activities
Develop and execute test methods which specify measurement equipment, test set-up, measurement systems analysis, and data analysis
Develop realistic and actionable design plans

Fulltime

New

In-House Employment Lawyer

We have an exciting opportunity for an individual to join our Liverpool FC, in-h...

Location

United Kingdom , Liverpool

Salary:

Not provided

Liverpool Football Club

Expiration Date

March 13, 2026

Requirements

Qualified solicitor (England & Wales) with minimum 5 years’ PQE in employment law
Current practicing certificate (SRA) with up-to-date CPD
Strong background in high risk, complex employee relations and Employment Tribunal litigation
Experience working in fast paced, high profile or highly regulated environments (e.g. sport, media, large corporates)
Demonstrable experience handling DSARs, GDPR related issues and data heavy case management
Confident in drafting and negotiating employment contracts, policies, settlement agreements and international terms

Job Responsibility

Provide expert, commercially focused employment law advice to leaders and People & Culture teams and business leaders
Advise across all areas of UK employment law
Monitor developments in employment legislation and ensure the Club remains compliant and future‑ready
Produce clear legal guidance, risk assessments and recommended options
Lead ER cases
Guide the ER Manager and People team
Coach managers and People Partners on case strategy and risk management
Lead all employment‑related DSAR responses in partnership with People Services and Data Protection teams
Advise on GDPR compliance in investigations, suspensions and information sharing
Recommend process improvements to reduce risk and improve efficiency

What we offer

Competitive salary
25 days holiday plus 8 bank holidays and the option to purchase up to an additional 5 days
Contributory pension scheme matching up to 5.5%
Life Assurance Cover
Free financial guidance and mortgage advice
Car salary sacrifice scheme for affordable driving
Cycle to Work scheme to keep you active
Purchase season ticket loans for easier commuting
Exclusive shopping discounts & cashback with top retailers
Will Writing Service for future planning

Fulltime

New

Store Associate

Retail Store Associates play a meaningful role within the CVS Health family. At ...

Location

United States , Fall River

Salary:

15.00 - 19.00 USD / Hour

CVS Health

Expiration Date

April 24, 2026

Requirements

At least 16 years of age
Remaining upright on the feet, particularly for sustained periods of time
Lifting and exerting up to 35 lbs of force occasionally, up to 10 lbs of force frequently, and a negligible amount of force regularly to move objects to and from, including overhead lifting
Visual Acuity - Having close visual acuity to perform activities such as: viewing a computer terminal, reading, visual inspection involving small parts/details

Job Responsibility

Providing differentiated customer service by anticipating customer needs, demonstrating compassion and care in all interactions, and actively identifying and resolving potential service issues
Focusing on the customer by giving a warm and friendly greeting, maintaining eye contact and offering help locating additional items, when needed
Accurately perform cashier duties - handling cash, checks and credit card transactions with precision while following company policies and procedures
Maintaining the sales floor by restocking shelves, checking in vendors, updating pricing information and completing inventory management tasks as directed by store manager
Supporting opening and closing store activities, when needed
Providing customer support to all departments, including photo and beauty, ensuring departments are fully stocked and operational while remaining current with all updated services and tools
Assisting pharmacy personnel when needed, including working regular shifts in the pharmacy as part of opportunities for growth and career development
Embracing and advocating for new CVS services and loyalty programs that support our purpose of helping people on their path to better health

What we offer

Affordable medical plan options
401(k) plan (including matching company contributions)
Employee stock purchase plan
No-cost programs for all colleagues including wellness screenings, tobacco cessation and weight management programs, confidential counseling and financial coaching
Paid time off
Flexible work schedules
Family leave
Dependent care resources
Colleague assistance programs
Tuition assistance

Parttime

Advanced Technician - Metrology

Manufacturing Technology Centre

Location:
United Kingdom , Coventry

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Advanced Technician - Metrology

PMEL Technician

PMEL Technician

Tooling Technician

Senior Manager, Engineering, Maintenance & Facilities

Production Technician I

Sr R&D Engineer

In-House Employment Lawyer

Store Associate

Advanced Technician - Metrology

Manufacturing Technology Centre

Location:United Kingdom , Coventry

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Advanced Technician - Metrology

PMEL Technician

PMEL Technician

Tooling Technician

Senior Manager, Engineering, Maintenance & Facilities

Production Technician I

Sr R&D Engineer

In-House Employment Lawyer

Store Associate

Location:
United Kingdom , Coventry

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
March 04, 2026